Results 1 to 2 of 2
  1. #1
    New Member
    Join Date
    Apr 2016
    Posts
    4
    Location
    LIVE OAK, FL
    Tractor
    Gravely Model 991084 ZT HD 60

    Default Gravely ZT HD 60 Pulley Replacement

    Hello:

    I'm new to the forum. We have a Gravely Model 991084, ZT HD 60.

    Working on pulley replacement, Gravely part #59211500.

    We've tried liquid wrench and gear puller, and the old pulley seems to be seized on the spindle.

    The entire deck had been replaced under warranty due to stress cracks. It appears when the deck was replaced the pulley was bent.

    Any ideas or suggestions on how to get this pulley off would be appreciated.

    Many thanks!

  2. #2
    Platinum Member 2ndhalf's Avatar
    Join Date
    Jan 2015
    Posts
    772
    Location
    Central Ohio
    Tractor
    Gravely ZT HD 60, MF GC2400

    Default Re: Gravely ZT HD 60 Pulley Replacement

    My first thought is to have them fix it if they bent it. If that isn't an option heat the Pulley. Even a torch you get at lowes may be enough.. After it is hot use a Gear puller with a slide hammer if you can borrow one. Or take it to a repair shop and ask them to pull it.
    One year my dad bought my mom a mood ring, when she was in a good mood it was blue... when she was in a bad mood it made a red mark upside my dads head!

Similar Threads

  1. LT 1018 Electric PTO Pulley/Pulley Shaft Problem
    By cfkenney in forum Cub Cadet Tractors
    Replies: 3
    Last Post: 08-27-2014, 04:06 PM
  2. Z134 Water pump pulley and crank pulley do not line up
    By Gpops in forum Massey Ferguson Classic/Vintage
    Replies: 6
    Last Post: 07-23-2013, 08:14 PM
  3. Gravely Promaster 44Z blade replacement question.
    By satman858 in forum Gravely & Ariens
    Replies: 4
    Last Post: 06-26-2013, 09:20 PM
  4. replacement Pulley
    By TractorEd1 in forum Parts/Repairs
    Replies: 2
    Last Post: 06-14-2012, 08:59 PM
  5. MF135 Cont. Water pump/pulley replacement?
    By BobG_in_VA in forum Massey Ferguson Owning/Operating
    Replies: 3
    Last Post: 10-11-2011, 07:26 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2017 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.