Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Silver Member
    Join Date
    Jul 2003
    Posts
    125
    Location
    Jewel Lake, ID

    Default Shibaura D23F Parts, Clutch, etc

    Hi all, I'm hoping some of our posters can help me with sources of parts for my Shibaura. Last summer I had the clutch "freeze" and finally got around to splitting the tractor. Once I started pulling her apart the cause got to be pretty apparant, about 2 cups of water drained out of the bellhousing area. Sure enough, clutch was rusted to the pressure plate. Not a real big deal, but unfortunately back when I first found it froze I stood on the brakes with the clutch pedal depressed trying to break it free, unfortunately I think this took off a tooth from the ring/pinion, I still need to tear into this. So anyway, is there anyone that carries or can get the following:
    Clutch
    Pressure Plate
    Throwout bearing
    Ring gear and pinion
    Brake pads (while I'm at it)

    Any help would be much appreciated.

    I think I'm going to drill and tap a hole for a plug on the bottom of the bellhousing dust shield to make sure it doesn't fill up again, I really should have looked into this before.

    Brian
    Kubota L3240HST, LA 724 FEL, filled R4s
    Landpride RBT3584 with hydraulic offset and angle
    Box blade and Jap tiller
    Broken Shibaura D23F

  2. #2
    Veteran Member Kays Supply's Avatar
    Join Date
    Jul 2006
    Posts
    1,119
    Location
    Southern Illinois
    Tractor
    Iseki TA 207

    Default Re: Shibaura D23F Parts, Clutch, etc

    I got a parts manual and parts from Bryan Blanchard in Timaru ,New Zealand E Mail wilkinsp@lhg.co.nz and phone 03-688-2031

  3. #3
    Silver Member
    Join Date
    Jul 2003
    Posts
    125
    Location
    Jewel Lake, ID

    Default Re: Shibaura D23F Parts, Clutch, etc

    Thanks! I'll give him a try if I don't find someone in the states, and that isn't looking really promising right now.

    Bri
    Kubota L3240HST, LA 724 FEL, filled R4s
    Landpride RBT3584 with hydraulic offset and angle
    Box blade and Jap tiller
    Broken Shibaura D23F

  4. #4
    Veteran Member
    Join Date
    Apr 2000
    Posts
    1,603
    Location
    Dixon, Il
    Tractor
    ford 9700, tw30, massey, jd2030 jd4010, yanmar F60d, ym330d, ym276d,ym226d,ym186d, ym2000, ym155

    Default Re: Shibaura D23F Parts, Clutch, etc

    I have a parts book for your tractor & can supply parts for your tractor.

  5. #5
    Silver Member
    Join Date
    Jul 2003
    Posts
    125
    Location
    Jewel Lake, ID

    Default Re: Shibaura D23F Parts, Clutch, etc

    Lens can get me the clutch and brake parts, but no go on the ring and pinion (they are toast, tore into her more over the weekend). Does anyone have any possible sources of supply?

    Kays, I just sent an email to Bryan as well, we'll see what comes through.

    Thanks. Right now I have a bunch of expensive scrap metal in my garage...

    Brian
    Kubota L3240HST, LA 724 FEL, filled R4s
    Landpride RBT3584 with hydraulic offset and angle
    Box blade and Jap tiller
    Broken Shibaura D23F

  6. #6
    Elite Member
    Join Date
    Mar 2002
    Posts
    3,562

    Default Re: Shibaura D23F Parts, Clutch, etc

    A Google search turns up a sizeable list of sites that claim to have new and used Shibaura parts. Can we assume you have tried all of those?

  7. #7
    Veteran Member
    Join Date
    Apr 2000
    Posts
    1,603
    Location
    Dixon, Il
    Tractor
    ford 9700, tw30, massey, jd2030 jd4010, yanmar F60d, ym330d, ym276d,ym226d,ym186d, ym2000, ym155

    Default Re: Shibaura D23F Parts, Clutch, etc

    Shibaura in Japan no longer supplies the ring/pinion set. It will have to used or NOS.

  8. #8
    Silver Member
    Join Date
    Jul 2003
    Posts
    125
    Location
    Jewel Lake, ID

    Default Re: Shibaura D23F Parts, Clutch, etc

    After having the tractor sitting in my shop in pieces for a year and a half, I'm going to break down and part it out, no luck finding parts. This is just one last request if anyone has any ideas.

    Could be worse, I have the wife talked into a new kubota.

    Bri
    Kubota L3240HST, LA 724 FEL, filled R4s
    Landpride RBT3584 with hydraulic offset and angle
    Box blade and Jap tiller
    Broken Shibaura D23F

  9. #9
    Veteran Member EFC's Avatar
    Join Date
    Dec 2001
    Posts
    1,149
    Location
    Richland, Washington
    Tractor
    Enough

    Default Re: Shibaura D23F Parts, Clutch, etc

    Was it the front ring and pinion or rear ring and pinion that was bad?

    Dont tell me your going to Tumac.....

    Buck

  10. #10
    Veteran Member Kernopelli's Avatar
    Join Date
    Oct 2006
    Posts
    1,758
    Location
    Carterville, Illinois
    Tractor
    Mitsubishi MTE2000D, Dig It 258 Backhoe

    Default Re: Shibaura D23F Parts, Clutch, etc

    If it is the front R&P, my thought would be to explore the possibility of replacing the entire front axle with another brand from one of the tractor bone yards.
    Darryl

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.