brianidaho
Silver Member
Hi all, I'm hoping some of our posters can help me with sources of parts for my Shibaura. Last summer I had the clutch "freeze" and finally got around to splitting the tractor. Once I started pulling her apart the cause got to be pretty apparant, about 2 cups of water drained out of the bellhousing area. Sure enough, clutch was rusted to the pressure plate. Not a real big deal, but unfortunately back when I first found it froze I stood on the brakes with the clutch pedal depressed trying to break it free, unfortunately I think this took off a tooth from the ring/pinion, I still need to tear into this. So anyway, is there anyone that carries or can get the following:
Clutch
Pressure Plate
Throwout bearing
Ring gear and pinion
Brake pads (while I'm at it)
Any help would be much appreciated.
I think I'm going to drill and tap a hole for a plug on the bottom of the bellhousing dust shield to make sure it doesn't fill up again, I really should have looked into this before.
Brian
Clutch
Pressure Plate
Throwout bearing
Ring gear and pinion
Brake pads (while I'm at it)
Any help would be much appreciated.
I think I'm going to drill and tap a hole for a plug on the bottom of the bellhousing dust shield to make sure it doesn't fill up again, I really should have looked into this before.
Brian