Page 3 of 3 FirstFirst 123
Results 21 to 22 of 22
  1. #21
    Bronze Member hogheadCTD's Avatar
    Join Date
    Nov 2012
    Posts
    76
    Location
    North Central Iowa
    Tractor
    John Deere 2030 w/ JD 145 fel

    Default Re: Need help with a TSC 16' electric hay elevator

    -hay-con-2-jpg

    What killed this ole conveyer was the brass bushing the held the shaft for the 12"v belt pulley and the 3" sprocket. The metal wasnt thick enough so I welded in a piece of angle iron for support. I found a flanged needle bearing to use instead a brass bushing. After installing the shaft and pulleys/sprockets I figured out I needed a pillow block bearing to keep the shaft from being pulled by the belt or chain.

  2. #22
    Bronze Member hogheadCTD's Avatar
    Join Date
    Nov 2012
    Posts
    76
    Location
    North Central Iowa
    Tractor
    John Deere 2030 w/ JD 145 fel

    Default Re: Need help with a TSC 16' electric hay elevator

    -hay-con-3-jpg

    I basically rebuilt the drive chain shaft completely due to all the bushings were shot and the shaft was worn. Sozzie helped me out with finding a new drive chain sprocket. Thanks again!! Next spring I need to make a shield for it. My wife about stuck her boot in the drive belt while moving hay.

    I ended up with $200 when it was all done. Thanks for all the input.

Page 3 of 3 FirstFirst 123

Similar Threads

  1. Hay Elevator
    By MRF in forum Haying
    Replies: 7
    Last Post: 07-05-2012, 05:23 PM
  2. hay elevator
    By Edelpils in forum Attachments
    Replies: 2
    Last Post: 04-08-2012, 02:53 PM
  3. I am looking for a Hay elevator
    By 7041 in forum Owning/Operating
    Replies: 9
    Last Post: 11-03-2010, 03:00 PM
  4. Hay Elevator
    By bladerunner3 in forum Build-It Yourself
    Replies: 7
    Last Post: 11-18-2009, 08:34 PM
  5. Hay Elevator
    By Lloyd_E in forum Rural Living
    Replies: 2
    Last Post: 05-07-2007, 04:05 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.