Results 1 to 6 of 6
  1. #1
    Veteran Member 6sunset6's Avatar
    Join Date
    May 2007
    Posts
    1,001
    Location
    SE NY
    Tractor
    NH TC34DA 34HP HST, 2 rear remotes, front diverter, loaded R4's, MF 30 TLB

    Default Hydraulic adds

    I guess this belongs here. One rear remote . Added a diverter valve to run angle plow up front and snow blower chute in the back. Front also runs a thumb in the summer.
    First attempt at pictures.
    Attached Images Attached Images
    Bob H
    NH 2007 TC34DA 1985 MF30E Hoe

  2. #2
    Bronze Member
    Join Date
    Sep 2006
    Posts
    50
    Location
    Nashville, TN
    Tractor
    Kubota L3010

    Default Re: Hydraulic adds

    Welcome and nice job! I like the hoe rack on the back. Any problems plumbing the lines?

  3. #3
    Veteran Member 6sunset6's Avatar
    Join Date
    May 2007
    Posts
    1,001
    Location
    SE NY
    Tractor
    NH TC34DA 34HP HST, 2 rear remotes, front diverter, loaded R4's, MF 30 TLB

    Default Re: Hydraulic adds

    No problems plumbing except running out of fittings. Also could not decide on R1 or R2 hose. Had some of each. R2 is way over kill but much more robust. I use reusable hose ends and they are hose size specific. I wish I had a crimper $1000 and could use crimp fittings. There are more types available and they are cheaper.
    There is a shovel above the hoe. It's nice , they go where I go.
    Bob H
    NH 2007 TC34DA 1985 MF30E Hoe

  4. #4
    Silver Member
    Join Date
    Oct 2002
    Posts
    238
    Location
    Connecticut
    Tractor
    Kioti LK2554

    Default Re: Hydraulic adds

    Nice setup for the snowblower. Although I use a hydraulic motor and mine spins 360 degrees, cause I like to shoot myself in the face every once in awhile.
    Bob
    Kioti LK2554

  5. #5
    Veteran Member BTDT's Avatar
    Join Date
    Sep 2006
    Posts
    2,209
    Location
    North Texas
    Tractor
    IH M Farmall-propane powered, H Farmall (father-in-laws), Ford 1300 diesel

    Default Re: Hydraulic adds

    Nice clean install. That's a high dollar hoe holder you have there (copper pipe?).
    Praise is not something you do to get closer to God, praise is a response to God being close to you.

  6. #6
    Veteran Member 6sunset6's Avatar
    Join Date
    May 2007
    Posts
    1,001
    Location
    SE NY
    Tractor
    NH TC34DA 34HP HST, 2 rear remotes, front diverter, loaded R4's, MF 30 TLB

    Default Re: Hydraulic adds

    Don't know where to put this so might as well use my own thread. It could go 6 other places.
    Agricultural Tractors & Equipment - ABC Groff, Inc
    Go to this web site and look at Fasse valves.
    Probably cost like they were made at Fort Knox but what a clean package.
    Bob H
    NH 2007 TC34DA 1985 MF30E Hoe

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.