Results 1 to 3 of 3
  1. #1
    Platinum Member
    Join Date
    Mar 2006
    Lubbock, Texas
    1996 Kubota L4200 GST, LA680 FEL

    Default Using an extra loader valve for rear remotes?

    I have a line on an extra joystick loader valve with all the trimmings. I was thinking that I could use this for 2 rear remotes pretty easily. It is going to be a little bulky, but I was thinking I could figure out a way to get it mounted where it wouldn't be too much in the way.

    Am I missing something here, would there be any big pros or cons to using a loader valve for rear remotes? I was thinking it would be nice for a top and tilt setup as you could run it with a single joystick.

    Thanks, Nathan
    1996 Kubota L4200 GST, LA680 FEL, + several attachments

  2. #2
    Super Star Member kennyd's Avatar
    Join Date
    Jul 2003
    Westminster, MD
    John Deere 4110

    Default Re: Using an extra loader valve for rear remotes?

    No problem at all, just make sure the flow rate (GPM) matches or exceeds your tractors specs.
    John Deere 4110HST
    FEL, MMM, Artillian 42" Forks, I-Match, Ballast Box, #380 plow (modified to fit), Markham LD-48 Grapple, Trac-Vac 854 and lots of other STUFF.

    John Deere 4x2 Turf Gator

    View some of my projects/adventures in my Picasa Album

    Simple JDParts Tutorial HERE

  3. #3
    Super Member JerryG's Avatar
    Join Date
    Apr 2000
    Northwest Arkansas
    MF 1440-4 PowerShuttle

    Default Re: Using an extra loader valve for rear remotes?

    I have used one that way for several years. It works great.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
© 2013 TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.