dirt clod
Gold Member
- Joined
- Jul 21, 2006
- Messages
- 332
- Location
- panama city and altha florida
- Tractor
- Kubota L3300, m5700, case 580se
Looking at getting a cheap grapple to mount on bucket. Tractor is L3300.
Searched posts on this. Looks like a princeton valve from surplus center would be the cheapest. Guess I might as well get a 3 spool for T&T. If I understand it right the fluid goes 1st through the FEL and then it goes its pb port to the 3 point lift.
1) So the valve for the remotes would go in series between the FEL and 3 point?
2) As such I would not need any parts from kubota?
3) Looking at the valves there is all kinds of differant ones, which would I need?
Searched posts on this. Looks like a princeton valve from surplus center would be the cheapest. Guess I might as well get a 3 spool for T&T. If I understand it right the fluid goes 1st through the FEL and then it goes its pb port to the 3 point lift.
1) So the valve for the remotes would go in series between the FEL and 3 point?
2) As such I would not need any parts from kubota?
3) Looking at the valves there is all kinds of differant ones, which would I need?