Kubota L 3010 Remote Hydraulics

eddieirvine · 05-20-2008, 12:55 PM

I am a new member and I was not aware that one of your members Madreferee had passed my prayers go out to all the members and family. My question is on hydraulics it has been talked about on here I see many times but I have a Kubota L 3010 and as I have read some time back there was someone who made there own hyd block that connects directly to they ones I allready have under the seat of my tractor, Kubota as of a couple years back and still do as far as I know make a remote hydraulic kit to bolt on to exsisting hyd block. I would like to make this block because they are really proud of theres and I would need a drawing or pictures of this if anyone has them, also how to hook all of this up what I want to do with this is run my top link and and maybe have a spare port for whatever down the road. So if any of you have any suggestions or different way of doing this please let me know I am very open for suggestions thanks Eddie.I.

kennyd · 05-23-2008, 08:57 AM

I sort of remember that thread from YEARS ago, when someone machined the block themselves, but I don't remember them posting any detailed specs/measurements about it...Have you found that thread by searching?

Hooking it all up ONCE you have the block is the easy part!

eddieirvine · 05-24-2008, 09:38 AM

If you could help with the assembly of it all let me know, also I have not really looked into where this block really goes that would be helpfull also thanks again EddieNo I haven't found it with a search I have tried found some talking about the subject but nothing in detail, I am guessing there is someone in the forum with some good information just have to wait I guess and see what develops I just know there has to be a way to do all of this but I want to do it right and not cause any problems with hyd pumps and major parts thanks Eddie

kennyd · 05-24-2008, 10:06 AM

Eddie,
I think THIS is the post I was thinking of...There may have been one more somewhere though...

How much is the block from Kubota?

eddieirvine · 05-24-2008, 10:33 PM

The block is part of a kit which contains the block and hoses if I remember right no valve $700.00 as of last year no Top link hyd cylinder either

Leejohn · 05-26-2008, 03:15 AM

Eddie see if this can help you. I think if you take the plate off under the seat you can get what you need. It looks like to me you well need a valve with PB. If you use a stack valve you can also make the inlet side plate to match your valve. Lee

05-20-2008, 12:55 PM	#1 (permalink)
eddieirvine New Member Join Date: May 2008 Location: Indiana Posts: 20	Kubota L 3010 Remote Hydraulics I am a new member and I was not aware that one of your members Madreferee had passed my prayers go out to all the members and family. My question is on hydraulics it has been talked about on here I see many times but I have a Kubota L 3010 and as I have read some time back there was someone who made there own hyd block that connects directly to they ones I allready have under the seat of my tractor, Kubota as of a couple years back and still do as far as I know make a remote hydraulic kit to bolt on to exsisting hyd block. I would like to make this block because they are really proud of theres and I would need a drawing or pictures of this if anyone has them, also how to hook all of this up what I want to do with this is run my top link and and maybe have a spare port for whatever down the road. So if any of you have any suggestions or different way of doing this please let me know I am very open for suggestions thanks Eddie.I.

05-23-2008, 08:57 AM	#2 (permalink)
kennyd Elite Member Join Date: Jul 2003 Location: Westminster, MD Posts: 3,029	Re: Kubota L 3010 Remote Hydraulics I sort of remember that thread from YEARS ago, when someone machined the block themselves, but I don't remember them posting any detailed specs/measurements about it...Have you found that thread by searching? Hooking it all up ONCE you have the block is the easy part! __________________ JD 4110HST FEL, 60" MMM, 60" Rear Blade, Ballast Box, Imatch, #380 Snow Plow, FEL Forks, Goossen 3PH Chipper/Shredder, and much more "stuff"

05-24-2008, 09:38 AM	#3 (permalink)
eddieirvine New Member Join Date: May 2008 Location: Indiana Posts: 20	Re: Kubota L 3010 Remote Hydraulics If you could help with the assembly of it all let me know, also I have not really looked into where this block really goes that would be helpfull also thanks again EddieNo I haven't found it with a search I have tried found some talking about the subject but nothing in detail, I am guessing there is someone in the forum with some good information just have to wait I guess and see what develops I just know there has to be a way to do all of this but I want to do it right and not cause any problems with hyd pumps and major parts thanks Eddie

05-24-2008, 10:06 AM	#4 (permalink)
kennyd Elite Member Join Date: Jul 2003 Location: Westminster, MD Posts: 3,029	Re: Kubota L 3010 Remote Hydraulics Eddie, I think THIS is the post I was thinking of...There may have been one more somewhere though... How much is the block from Kubota? __________________ JD 4110HST FEL, 60" MMM, 60" Rear Blade, Ballast Box, Imatch, #380 Snow Plow, FEL Forks, Goossen 3PH Chipper/Shredder, and much more "stuff"

05-24-2008, 10:33 PM	#5 (permalink)
eddieirvine New Member Join Date: May 2008 Location: Indiana Posts: 20	Re: Kubota L 3010 Remote Hydraulics The block is part of a kit which contains the block and hoses if I remember right no valve $700.00 as of last year no Top link hyd cylinder either

05-26-2008, 03:15 AM	#6 (permalink)
Leejohn Silver Member Join Date: Sep 2007 Location: Doniphan, Mo. Posts: 102	Re: Kubota L 3010 Remote Hydraulics Eddie see if this can help you. I think if you take the plate off under the seat you can get what you need. It looks like to me you well need a valve with PB. If you use a stack valve you can also make the inlet side plate to match your valve. Lee Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode