tc30 loader valve leak...

DaryleD · 05-27-2008, 04:58 AM

I have a leaky loader valve on the NH TC30, 7308 NH loader. It is leaking from the set screw/nut that adjusts the pressure for the loader. It is leaking all the time, even when the loader is not under load. I tried tightening it, but it didn't work. Is there an O-ring behind the set screw that could be leaking, or do I have to buy a whole new valve? I am also wondering what the procedure would be to make sure that I have the correct loader pressure? That is, if I have to take the screw/nut assembly out to replace an o-ring or something. Thanks folks.

Daryle.

05-27-2008, 04:58 AM	#1 (permalink)
DaryleD Silver Member Join Date: Jan 2006 Location: New Hampshire Posts: 178	tc30 loader valve leak... I have a leaky loader valve on the NH TC30, 7308 NH loader. It is leaking from the set screw/nut that adjusts the pressure for the loader. It is leaking all the time, even when the loader is not under load. I tried tightening it, but it didn't work. Is there an O-ring behind the set screw that could be leaking, or do I have to buy a whole new valve? I am also wondering what the procedure would be to make sure that I have the correct loader pressure? That is, if I have to take the screw/nut assembly out to replace an o-ring or something. Thanks folks. Daryle. __________________ The longer I live; the more I realize how blessed that I am.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode