Results 1 to 4 of 4
  1. #1
    New Member
    Join Date
    May 2009
    Posts
    7

    Default Ford 3400 3 point hitch problem

    Hello,

    Sorry to post this in two spots but this section seems to get more action.

    I have a Ford 3400 and the 3 point hitch is acting up. The hitch will only go all the way up or all the way down, you can't get it to do anything in between even if you only move the lever just a little bit. What would cause this problem? I have tried the draft control lever in both positions and it does not seem to help.

    Thanks

  2. #2
    Veteran Member
    Join Date
    Sep 2004
    Posts
    2,487
    Location
    Kansas, Butler county, Just east of DooDah
    Tractor
    Kubota L4200 GSTCA

    Default Re: Ford 3400 3 point hitch problem

    There is linkage either internal or external that cancels the lift control valve. If the linkage is maladjusted or disconnected it can do just as you describe.

  3. #3
    New Member
    Join Date
    May 2009
    Posts
    7

    Default Re: Ford 3400 3 point hitch problem

    Thank You! I will look into it this weekend.

  4. #4
    New Member
    Join Date
    May 2009
    Posts
    7

    Default Re: Ford 3400 3 point hitch problem

    I can't find this linkage in my ford repair manual. Does anyone either know what page it explains this linkage or how you adjust it?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2016 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.