wdchyd
Elite Member
The other thing to consider is the GPM flows increase on the return stroke proportionately as the rod displacement increases.....generally not a problem but return flow rate must not exceed the ratings of the DCV......
recently rebuilt a wood processor cyl 3.5 rod x 5.0 bore......they had a pilot-to-open check valve tee'd in to the base end port to drain off directly to the tank when returning....
recently rebuilt a wood processor cyl 3.5 rod x 5.0 bore......they had a pilot-to-open check valve tee'd in to the base end port to drain off directly to the tank when returning....