JD2320 - POWER BEYOND OUTLETS TO 2-SPOOL VALVE w. QUICK CONNECTS - PARTS LIST

[dmay]

With thanks to Kennyd's post and links provided here to posts from lt220, jimgerken and lincolnvt (thanks all for sharing your knowledge)

http://www.tractorbynet.com/forums/...it-selective-control-valve-2.html#post2263359

I am thinking to mount a valve oriented like this:

http://www.tractorbynet.com/forums/...-installing-2-spool-selective-control-051.jpg

With QC's directly attached similar to this:

http://www.tractorbynet.com/forums/...90482529-2520-rear-remotes-added-img_4790.jpg

Here is what I think _might_ be the correct parts list to order:

JOHN DEERE

PT13744 PB PLUG, QTY=1

SURPLUS CENTER

DSCV BLOCK, FRONT PORT
9-6805-6-6 SAE 6M TO 3/8" NPTF 90 ELBOW, QTY=1

DSCV BLOCK, REAR PORT
9-6901-6-6 SAE 6M TO 3/8" NPTF 90 SWIVEL, QTY=1
9-5503-6-63/8" NPTM TO 3/8" NPTF 45 ELBOW, QTY=1

PB HOSES
903-3836 3/8" X 36" 3/8 NPTM X 3/8 NPTM 2750 PSI HYD HOSE, QTY=2
9-A2-172-D 3/8 IN SINGLE WIRE DUAL HYDRAULIC HOSE CLAMP, QTY=1

2 SPOOL VALVE
9-7401 2 SPOOL COMPACT 10 GPM JOYSTICK CONTROL VALVE, QTY=1

VALVE INLET/OUTLET PORTS TO PB HOSES
9-6901-8-6 SAE 8M x 3/8 NPTF 90 SWIVEL, QTY=2

VALVE WORK PORTS TO DIRECT ATTACHED QUICK COUPLERS
9-6902-8-6 SAE 8M x 3/8 NPTF 45 SWIVEL, QTY=4
9-7184 3/8" NPTM - 3/8" NPTM HEX NIPPLE, QTY=4
9-7381-F 3/8 NPTF QUICK COUPLER, QTY=4

What do you think? Any changes/additions recommended?

 

[kennyd]

Sounds like a great plan:thumbsup:

I did not link my project before, so if you want to see how I did it look here: http://www.tractorbynet.com/forums/customization/69599-rear-remotes-jd4110.html

 

[banditbooker]

Are the quick couplers you have listed the same as the john deere ones? I have a jd 4110 and I'm going to put the "home made" power beyond kit on it like kennyd and jim did to theirs and I'd like them all to be the same. This is my first post and I'd like to thank all the guys who took the time to post pics and explain what they did. it was a HUGE head start for me.

 

[kennyd]

Are the quick couplers you have listed the same as the john deere ones? I have a jd 4110 and I'm going to put the "home made" power beyond kit on it like kennyd and jim did to theirs and I'd like them all to be the same. This is my first post and I'd like to thank all the guys who took the time to post pics and explain what they did. it was a HUGE head start for me.

Welcome to TBN Bandit

The QD's I used for mine all came from JD...

 

[banditbooker]

Thanks, maybe i'll just do that too just to be on the safe side.

 

[gtrippleb]

dmay,

Have you order the parts and done your install yet?

 

[banditbooker]

hi gtrippleb, i don't mean to butt in here, but i have a jd4110 and i followed all these guys posts and have installed my power beyond and spool valve. if i can help you, i'd be glad to.

 

[dmay]

dmay,

Have you order the parts and done your install yet?

Not yet. I'm two weeks through a five week evening welding class which is keeping my play time busy.