I have a FFC Skid steer attachment backhoe that I am going to put on my MF 1260 that has a universal skid steer plate on the Woods 1210 loader that is on my tractor. I plan to use my remotes to operate the ram on the backhoe. My remote valve is a Cross SBA2 single spool directional valve with an adjustable relief valve factory set at 2000psi. The backhoe owners manual states the tilt circuit on the backhoe has no port relief and that a relief valve needs to be installed for the power units tilt circuit. My question is, since I am not using my loader valve tilt circuit, and instead am using my remote for the opening and closing of the hoe bucket, is it necessary to install another relief valve in addition to the one that is in the remote valve??
Thanks much.
Thanks much.