ddagenhart
New member
- Joined
- Aug 9, 2011
- Messages
- 2
- Tractor
- Ford 3000
Hello,
This is my first time on this--this is new to me.
I recently installed a new aftermarker power steering pump on my 3000 and the steering seemed to be fine but while bushhogging and bottoming out the steering to right or left to make a hard turn it seemed to want to drag to motor. After several turns the aluminum washers blew out from the banjo bolt on the back end of the cylinder closest to the steering wheel. Seems like there must be a lot of pressure building and not able to relieve. Any suggestions what may cause the drag on the motor when turning hard? Any advise very appreciated, Im at a loss.
Thanks!
This is my first time on this--this is new to me.
I recently installed a new aftermarker power steering pump on my 3000 and the steering seemed to be fine but while bushhogging and bottoming out the steering to right or left to make a hard turn it seemed to want to drag to motor. After several turns the aluminum washers blew out from the banjo bolt on the back end of the cylinder closest to the steering wheel. Seems like there must be a lot of pressure building and not able to relieve. Any suggestions what may cause the drag on the motor when turning hard? Any advise very appreciated, Im at a loss.
Thanks!