nickel plate
Veteran Member
I'm assuming that you have one rear remote set at this time. To operate a TnT you need two sets of RRs, is that $750.00 an installed price for one set of RRs? You might be able to do the install yourself-website the parts kits and the install instructions to see if you can. My NH TC40S for two sets of rear remotes ran about $520.00 per set and I installed them-easy job although one rear tire needed to be removed.I have been reading all the many ways of adding these rear remotes to a tractor. I want to add one to operate a scrape blade to angle and tilt it. My dealer sells a kit for my tractor, a branson, for a single spool for $750, Ouch! In talking further with him he asked, " Do you use your FEL when using the blade?" i said not usually. He said a simple way to accomplish this would be to run more lines from the FEL joystick to the rear with QD's and just disconnect the FEL and connect the new hoses that will control the blade. Now the joystick will control the rear blade. Do you guys see a problem with this if I can live w/o the FEL when using the blade. If really needed I could reattach the FEL.
Thanks in advance for any ideas.
If you go this way, other things can be powered off of those QDs-FEL grapple, Wood splitter, down force PHD, York rake, tree saw, etc.