Results 1 to 4 of 4
-
09-11-2011, 10:01 AM #1
- Join Date
- Nov 2010
- Posts
- 318
- Tractor
- Ford 1715
Kubota b7100 hydraulics very slow
I have a buddy who has a kubota B7100, 4wd, fel, runs great but the hydraulics are in slooow motion, what are some of the things we can check, thanks for any help.
-
09-11-2011, 03:29 PM #2
- Join Date
- Sep 2003
- Posts
- 18,924
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
Re: Kubota b7100 hydraulics very slow
Filters. Which hyd , drive hyd, or implement hyd such as loader, 3pt, etc.
Install a pressure age and monitor the pressure and report back. Maybe the pump is worn, and is pumping less than advertised, with low pressure.
A relief valve could be held open by debris/trash.
If you take your tractor by the dealer, and have them do a flow and pressure test, they can give you an informed idea what may be wrong.
Check that the 3pt lever is not all the way up, and keeping the system in relief.J.J.
When I works, I works hard. When I sits and thinks, I goes to sleep.
Git er done.
-
09-11-2011, 04:15 PM #3
Re: Kubota b7100 hydraulics very slow
Check the position of the three point control lever.
Egon50 years behind the times
Livin in aWorn out skin bag filled with rattlin bones
-
09-11-2011, 07:52 PM #4
- Join Date
- Sep 2007
- Posts
- 3,423
- Location
- Doniphan, Mo.
- Tractor
- Kubota L4240, B7800 & BX2660
Re: Kubota b7100 hydraulics very slow
If it's the 3pt lever then your feedback rod needs adjusted.
Similar Threads
-
Kubota hydraulics diagram
By LaVita in forum Kubota Owning/OperatingReplies: 9Last Post: 06-26-2015, 11:35 AM -
Flail Mower Kubota B7100 & flail - does this look ok?
By biffo in forum AttachmentsReplies: 17Last Post: 04-06-2009, 05:15 AM -
hydraulics on Kubota L4850
By WannabeChickenFarmer in forum HydraulicsReplies: 1Last Post: 02-28-2008, 10:40 AM -
Replacing a B7100 Kubota?
By bobm39 in forum Buying/Pricing/ComparisonsReplies: 8Last Post: 10-15-2007, 06:31 PM -
Century or Kubota
By EddieWalker in forum Century & BransonReplies: 75Last Post: 03-24-2004, 02:04 PM