double hunter
Gold Member
- Joined
- Nov 2, 2010
- Messages
- 441
- Tractor
- Ford 1715
I have a buddy who has a Kubota B7100, 4wd, fel, runs great but the hydraulics are in slooow motion, what are some of the things we can check, thanks for any help.
Kubota b7100 hydraulics very slow
- Thread starter double hunter
- Start date
J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,928
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
Filters. Which hyd , drive hyd, or implement hyd such as loader, 3pt, etc.
Install a pressure age and monitor the pressure and report back. Maybe the pump is worn, and is pumping less than advertised, with low pressure.
A relief valve could be held open by debris/trash.
If you take your tractor by the dealer, and have them do a flow and pressure test, they can give you an informed idea what may be wrong.
Check that the 3pt lever is not all the way up, and keeping the system in relief.
Install a pressure age and monitor the pressure and report back. Maybe the pump is worn, and is pumping less than advertised, with low pressure.
A relief valve could be held open by debris/trash.
If you take your tractor by the dealer, and have them do a flow and pressure test, they can give you an informed idea what may be wrong.
Check that the 3pt lever is not all the way up, and keeping the system in relief.
Egon
Epic Contributor
Check the position of the three point control lever.
Leejohn
Elite Member
If it's the 3pt lever then your feedback rod needs adjusted.