Results 1 to 4 of 4
  1. #1

    Join Date
    Mar 2003
    Posts
    10
    Location
    Culpeper, Virginia
    Tractor
    TN75S

    Default Hydraulic problem with a 53 NAA Golden Jubilee

    My 3pt. hitch will pulsate when there is any weight on it. The tractor sat for twenty years. I believe blow by of the seals is the problem. My question is, do I have to split the tractor to change the seals or can I do this through the top inspection plate? Any suggestions?
    Attached Images Attached Images

  2. #2
    Veteran Member
    Join Date
    Jun 2002
    Posts
    1,044
    Location
    Southwest PA
    Tractor
    Deere 4710/reverser, JD 318 (still needs TLC), JD LT160

    Default Re: Hydraulic problem with a 53 NAA Golden Jubilee

    SAM123

    You may not have to - most of the hydraulics can be gotten to after removing the "cover" under the seat. There is a video out (very homespun but great stuff) that describes the full tear-down and re-do of the NAA and 600 hydraulics. There's a lot of very minor things you can do to correct issues - mostly cleaning out gunk in various passages and the like. There's also some very good info on just how to take off what and when ("keep your finger over the end of the port to keep the ball bearing in place" - or "don't remove this bolt on the cover - it's holding x in place underneath."

    Definitely worth the $20 or so. Most of the old parts places that cater to Fords carry it. I bought one for my father-in-law but we didn't get round to the NAA hydraulics this past winter. Maybe next year.

    Great old tractors.

  3. #3

    Join Date
    Mar 2003
    Posts
    10
    Location
    Culpeper, Virginia
    Tractor
    TN75S

    Default Re: Hydraulic problem with a 53 NAA Golden Jubilee

    Thanks for the help!

  4. #4
    Old Timer Soundguy's Avatar
    Join Date
    Mar 2002
    Posts
    51,530
    Location
    Central florida
    Tractor
    ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC

    Default Re: Hydraulic problem with a 53 NAA Golden Jubilee

    Another sub I reead has a bunch of tractor guru's in it as well.. one guy ZANE, is a retired ford mechanic.

    9N / 2N / 8N /NAA

    Give them a try.

    Soundguy

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2016 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.