Help IDing Pump

   / Help IDing Pump #1  
C

cruzer

Member
Joined
Jul 16, 2007
Messages
30
Supposedly it's from a Plow setup off a Jeep bought at a Farm Fleet store 10yrs ago. The only markings on it are a "G" on the back. Anybody have an idea what it is or were i could find out? Specs?

Thanks

Stew
 

Attachments

  • Pump.jpg
    Pump.jpg
    30.9 KB · Views: 95
  • pump2.jpg
    pump2.jpg
    36.3 KB · Views: 92
  • pump1.jpg
    pump1.jpg
    30.2 KB · Views: 96
   / Help IDing Pump #2  
Commercial gear pump..(now Parker)...Any numbers on the flange?
 
   / Help IDing Pump
  • Thread Starter
#3  
wdchyd said:
Commercial gear pump..(now Parker)...Any numbers on the flange?
Click to expand...

Not sure. Just got it cheap on eBay but the guy didn't know anything about it. Other than what I listed above. Will see when I get it in a few days.

Cruzer
 
   / Help IDing Pump #4  
If it's from a plow setup then the pump may only be about 4-8 gpms.....there is a way to measure the gear set internally to approx the CID, then you could calculate with the prime mover rpm's to give you gpm's
 
   / Help IDing Pump
  • Thread Starter
#6  
Thanks, for the info. 4-5gpm would be perfect, even 2-3 will work ok for my size cylinders(1.5in). Will have to use the calculator if cant find out any other info on it.

Cruzer
 
   / Help IDing Pump
  • Thread Starter
#7  
Guess the guy couldn't see this info on the pump. I found the info on the Parker site. Looks like a 5gpm pump at 3k RPM!!! Which is perfect for the other random eBay purchase two spool valve I bought last year!!!
 

Attachments

  • image-3514591348.png
    image-3514591348.png
    757.4 KB · Views: 82
Last edited:
   / Help IDing Pump #8  
Nice Cruzer.....Looking forward to more pix on the project..:thumbsup:
 
You must log in or register to reply here.
 

Footer Links 1

Top