James Eric
Silver Member
- Joined
- Dec 28, 2009
- Messages
- 103
This is the pump that I own:
Specifications
Rated pressure: 2900psi.
Displacement .3759 cu. In/rev
Shaft: 1/2" keyed.
Ports: SAE 3/4-16 inlet: 9/16-18 outlet.
Rated RPM: 2000, Max RPM 4000
Part Number CB1A-F6SA
Are there any advantages or dis-advantages to running the pump at 2720 RPM in stead of 2000 RPM?
I am using it to power a Danco loader on a cub cadet 1250 tractor. My target lifting capacity is 400-500 pounds.
2040 RPM = 3.31 GPM
2720 RPM = 4.42 GPM
I plan to use 3/8" lines and run the PSI between 1200-1400.
What do you think?
Thanks,
James
Specifications
Rated pressure: 2900psi.
Displacement .3759 cu. In/rev
Shaft: 1/2" keyed.
Ports: SAE 3/4-16 inlet: 9/16-18 outlet.
Rated RPM: 2000, Max RPM 4000
Part Number CB1A-F6SA
Are there any advantages or dis-advantages to running the pump at 2720 RPM in stead of 2000 RPM?
I am using it to power a Danco loader on a cub cadet 1250 tractor. My target lifting capacity is 400-500 pounds.
2040 RPM = 3.31 GPM
2720 RPM = 4.42 GPM
I plan to use 3/8" lines and run the PSI between 1200-1400.
What do you think?
Thanks,
James