Results 1 to 2 of 2
04-04-2012, 08:30 AM #1
- Join Date
- Aug 2011
- Massey 231s, NH 1725
Loader Hydraulic Problem after replacing hose
I blew a hydraulic hose on the loader of my New Holland compact tractor. After replacing the hose I have two new problem with the loader hydraulics. First, pushing the joystick to the quick dump position causes the bucket to reverse directions and scoop instead of dump. Secondly, the bucket will only move half way when scooping and then it acts like it's reached it's positive stop.
I'm sure I didn't reverse any hoses because I only removed/replaced the damaged one. I was careful to bleed air from the hose and also topped off the fluid. What could be the problem?
04-04-2012 08:30 AM # ADS
04-04-2012, 08:49 AM #2
- Join Date
- Sep 2003
- JACKSONVILLE, FL
- Power-Trac 1445, KUBOTA B-9200HST
Re: Loader Hydraulic Problem after replacing hose
That is a symptom of air in the cyl's Purge the air by cycling the system many times
Check your QD's for good connection also.J.J.
When I works, I works hard. When I sits and thinks, I goes to sleep.
Git er done.
By James Eric in forum HydraulicsReplies: 9Last Post: 03-26-2012, 07:48 PM
By Ken_O in forum Kubota Owning/OperatingReplies: 16Last Post: 07-08-2009, 02:08 PM
By jawmaw in forum Kioti Owning/OperatingReplies: 7Last Post: 06-09-2008, 10:04 AM
By oscarman in forum Chinese TractorsReplies: 11Last Post: 01-03-2005, 06:33 PM
By davesisk in forum Power TracReplies: 16Last Post: 04-25-2002, 05:35 PM