Results 1 to 2 of 2
06-06-2012, 03:05 PM #1
- Join Date
- Feb 2012
- Fulton, Kansas
- Case IH JX75
Case IH JX75 Hydraulic Issue
I was mowing hay last night and everything seemed to be going ok, until I tried to raise the mower. The hydraulic arms would not raise, I then tried to raise the FEL and it wouldn't raise either. I needed to finish mowing the field so I kept going and kept trying the hydraulics every once in awhile. Finally a while later everything started working again. Not sure what is going on, anyone have any suggestions. Also, I have noticed lately that the power steering is not as effective as it normally is (little harder to steer).
06-06-2012, 03:32 PM #2
- Join Date
- Sep 2003
- JACKSONVILLE, FL
- Power-Trac 1445, KUBOTA B-9200HST
Re: Case IH JX75 Hydraulic Issue
Check your fluid levels, check screens if you have them,check filters, check that the valves are not in relief .
Use a pressure gage to determine if and where you have pressure and how much.J.J.
When I works, I works hard. When I sits and thinks, I goes to sleep.
Git er done.
By 284 International in forum Case-IHReplies: 8Last Post: 05-17-2012, 05:44 PM
By RubiconTJ in forum Case-IHReplies: 22Last Post: 02-03-2012, 10:16 PM
By Ductape in forum AttachmentsReplies: 4Last Post: 05-15-2011, 12:10 PM
By sweetjeep in forum Case-IHReplies: 0Last Post: 03-17-2009, 12:46 PM
By grsr3 in forum Chinese TractorsReplies: 27Last Post: 05-01-2007, 11:31 PM