Results 1 to 4 of 4
  1. #1
    New Member
    Join Date
    Jun 2012
    Posts
    4
    Location
    Fulton, MO
    Tractor
    Massey Ferguson 65

    Default Massey Ferguson 65 rear hydraulic problem

    I recently bought a Massey Ferguson 65 and added a rear remote kit by using the factory diverter valve. When the diverter is in three point mode, the lift arms work fine. I plumbed the top of the diverter valve into the positive port on a double action spool valve and then into a quick connect fitting, then did the same with the bottom of the diverter valve. When I move the valve lever there is action in the lines but not enough to do anything. Anyone have a suggestion?

  2. #2
    Super Star Member J_J's Avatar
    Join Date
    Sep 2003
    Posts
    17,876
    Location
    JACKSONVILLE, FL
    Tractor
    Power-Trac 1445, KUBOTA B-9200HST

    Default Re: Massey Ferguson 65 rear hydraulic problem

    In an open center hyd system, all valves are supposed to be in series.

    There should be unimpeded flow with all valves in neutral.
    J.J.

    When I works, I works hard. When I sits and thinks, I goes to sleep.

    Git er done.

  3. #3
    New Member
    Join Date
    Jun 2012
    Posts
    4
    Location
    Fulton, MO
    Tractor
    Massey Ferguson 65

    Default Re: Massey Ferguson 65 rear hydraulic problem

    Gotcha...how can I alter my setup to make that happen?

  4. #4
    Super Star Member J_J's Avatar
    Join Date
    Sep 2003
    Posts
    17,876
    Location
    JACKSONVILLE, FL
    Tractor
    Power-Trac 1445, KUBOTA B-9200HST

    Default Re: Massey Ferguson 65 rear hydraulic problem

    Open center hydraulics.

    If your valve has PB, that will feed the next valve and so and so on.

    If your valve does not have PB, then the tank port is sometimes used to feed the next valve.

    Also be careful of using QD's in the hyd flow path. If one should become unconnected, you will dead head the pump.

    Just be aware that the tank port on most valves is only rated for about 500 psi
    J.J.

    When I works, I works hard. When I sits and thinks, I goes to sleep.

    Git er done.

Similar Threads

  1. Michigan MASSEY FERGUSON 65 DIESEL-MATIC FOR SALE
    By patpettit in forum Private Party Ads
    Replies: 0
    Last Post: 03-30-2012, 02:20 PM
  2. Massey Ferguson 1643 Clutch Problem
    By tpoole12 in forum Massey Ferguson Owning/Operating
    Replies: 33
    Last Post: 04-21-2011, 04:07 PM
  3. Rear mounted sickle mower hydraulic lift
    By rowlettr in forum Hydraulics
    Replies: 14
    Last Post: 07-10-2010, 10:54 AM
  4. Help identify my fathers Massey
    By Willl in forum Massey Ferguson Owning/Operating
    Replies: 6
    Last Post: 10-23-2006, 02:15 AM
  5. MAHINDRA vs. MASSEY FERGUSON
    By Travis_R in forum Mahindra Owning/Operating
    Replies: 8
    Last Post: 08-09-2004, 12:13 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.