Results 1 to 2 of 2
07-02-2012, 12:53 PM #1
- Join Date
- Jul 2012
- Huxley, TX
- Massey Ferguson 492 4WD
Changing Hydraulic Fluid on Massey 492 4WD
I am attempting to change the hydraulic fluid on my MF492. I have the operators manual and it calls for removing the two drain plugs for the hydraulics. I have located them and thats not a problem, however, the 492 is 4WD and the manual says to open the drain plug fitted on the "front axle actioning case". There is a diagram but I can't make heads or tails of it. Any help would be greatly appreciated. Thanks.
07-02-2012, 01:21 PM #2
- Join Date
- Sep 2003
- JACKSONVILLE, FL
- Power-Trac 1445, KUBOTA B-9200HST
Re: Changing Hydraulic Fluid on Massey 492 4WD
Not looking at the axle, I would guess that there is a plug in the bottom of the differential, which should be the lowest point of the axle. .J.J.
When I works, I works hard. When I sits and thinks, I goes to sleep.
Git er done.
By massey492 in forum Parts/RepairsReplies: 0Last Post: 07-02-2012, 10:14 AM
By don4x4 in forum Kubota Owning/OperatingReplies: 1Last Post: 06-06-2005, 11:35 PM
By hbaird in forum Chinese TractorsReplies: 3Last Post: 05-22-2005, 11:02 PM
By twinstackram in forum Oil, Fuel & LubricantsReplies: 14Last Post: 03-28-2005, 10:42 PM
By MikePA in forum New Holland Owning/OperatingReplies: 21Last Post: 03-31-2004, 08:59 PM