Results 1 to 2 of 2
09-26-2012, 09:28 PM #1
- Join Date
- Jun 2011
- Cavendish, Vermont
- Ford 1985 2110/Loader, John Deere 755/Front Mounted Snow Blower,International 500E Crawler/4n1Bucket
Single lever loader control
Trying to install a single lever loader control in place of the 2 lever on my 2110 Ford. It is a NOS for a 2120 Ford around 1988. It is a Zexel stamped 46224 on the ID tag, which states *** No 307800-0721, *** Code 34001-3541. I don't know if it needs or I should say they use a power beyond bushing in the power beyond connection which is the one farthest away from the operators position. The center connection I think is the inlet, with the return being closest to the operator. Any info will appreciated.
09-30-2012, 01:45 PM #2
- Join Date
- Sep 2003
- JACKSONVILLE, FL
- Power-Trac 1445, KUBOTA B-9200HST
Re: Single lever loader control
If you are talking about a joy stick valve you will have 7 ports with PB.
There will be an IN port, an OUT port, a PB port, and 4 work ports.J.J.
When I works, I works hard. When I sits and thinks, I goes to sleep.
Git er done.
By ddb123 in forum Kioti Buying/PricingReplies: 12Last Post: 05-08-2012, 06:08 PM
By ronbrent in forum FordReplies: 3Last Post: 06-17-2011, 09:23 PM
By rmg in forum Kubota Owning/OperatingReplies: 2Last Post: 05-06-2008, 03:58 AM
By MDM in forum Kubota Owning/OperatingReplies: 11Last Post: 05-06-2007, 04:59 PM