Hello, just thought I would post an update to my last post.... Not sure if there is a way to add it to my last thread so here it is. I've been working on adding a new loader lever and qc's to my John deere x585. I built brackets that attach to the fender for the new loader valve, I made a bracket. For the qc's and used steel tubing to go from the valve to the qc's . I also used steel tubing to tie the valve into the hydraulic system on the tractor. I used a scrap piece of tubing attached to the male side of a qc to make a bleeder and everything worked, I bled all the lines and have flow through all of them, next is to change all the tubing on the loader attachment from the right side to the left side and paint the loader. I will post pictures soon, thank you all for your help