Results 1 to 3 of 3
-
11-06-2012, 08:29 AM #1New Member
- Join Date
- Jul 2012
- Posts
- 1
- Location
- NORTH TX
- Tractor
- 4035 mahindra
ADDING 3RD FUNCTION AND REAR SERVICE PORTS TO 4035 MAHINDRA
I HAVE A 2011 4035 MAHINDRA AND DID NOT COME WITH NO SERVICE PORTS ON THE REAR AND CHECKED AT THE DEALER SHIP AND VERY COSTLY FOR THE VALVE AND COMPONATS . REMEMBER THAT THE LOADER LEVER IS CONTROLED BY CABLES THAT GO DOWN TO THE VALVE BODY UNDER THE FLOOR BOARD.HAS ANYONE DONE THIS TO THERE 4035 .
-
11-06-2012, 09:08 AM #2Gold Member
- Join Date
- May 2012
- Posts
- 398
- Location
- NW Louisiana
- Tractor
- MF 35, Mahindra 4035
Re: ADDING 3RD FUNCTION AND REAR SERVICE PORTS TO 4035 MAHINDRA
My 4035 came with one remote, bought the "kit" from mahindra but haven't installed it yet....will also be installing true third function and two additional rear remotes...
-
11-16-2012, 11:43 AM #3Bronze Member
- Join Date
- Jul 2009
- Posts
- 63
Re: ADDING 3RD FUNCTION AND REAR SERVICE PORTS TO 4035 MAHINDRA
If either one of you guys could document a howto for the Mahindra with pictures before and after I would really appreciate it.
I have the kit but found the instructions somewhat lacking. I had it almost figured out then I went and got the backhoe added on and now Im really puzzled as it looks like they already added some of the kit components for the backhoe. Now not sure how to install the rear ports.
Similar Threads
-
Adding 3rd function and rear service ports
By WildArkie in forum HydraulicsReplies: 10Last Post: 10-26-2012, 02:12 PM -
Installing 3rd function and rear remote.
By kuboman in forum Kubota Owning/OperatingReplies: 3Last Post: 09-27-2011, 10:39 PM -
adding a 3rd function valve to a 755 john deere HELP!
By Kevin M in forum HydraulicsReplies: 26Last Post: 11-06-2009, 10:45 PM -
Adding a 3rd Function to a L4310 HST w/LA682 FEL
By SouthernConservative in forum Kubota Owning/OperatingReplies: 7Last Post: 06-02-2009, 05:36 PM -
Hydraulics: rear aux or other FEL 3rd function?
By DavidVT in forum CustomizationReplies: 4Last Post: 11-17-2005, 12:23 AM


Reply With Quote
