J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,928
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
Why not remove the input fitting and look at the hole size, it could be a restrictor nipple.
While the hose is off, place the end with out the nipple in a bucket and determine the GPM.
Check the output fitting as well.
If that fitting on the input is a water pipe fitting, you need to change it to a hydraulic fitting.
While the hose is off, place the end with out the nipple in a bucket and determine the GPM.
Check the output fitting as well.
If that fitting on the input is a water pipe fitting, you need to change it to a hydraulic fitting.