Results 1 to 5 of 5
  1. #1
    New Member
    Join Date
    Apr 2013
    Posts
    5
    Location
    Manitoba
    Tractor
    Kubota b2920

    Default Kubota b2920 rear remote

    Just had a thought for adding a rear remote but not sure if it will work. I have a valve off of an old stone picker that works to change the flow from one cylinder to another using a single remote tractor valve. I.E. pop it down would run picker table , pull it up would run the dump bucket. If I put this on my tractor could I run a set of hoses to rear and mount a block and use the up down of the joy stick to run rear remote just by switching flow ? Or is there something I am missing ?

  2. #2
    Super Star Member J_J's Avatar
    Join Date
    Sep 2003
    Posts
    18,922
    Location
    JACKSONVILLE, FL
    Tractor
    Power-Trac 1445, KUBOTA B-9200HST

    Default Re: Kubota b2920 rear remote

    Do you have a loader now?

    If so, then run the PB from the loader valve to the remotes, or use the PB from the hyd block to feed the remotes.

    You may be talking about something like this.

    Surplus Center - 1/2" NPT 20 GPM DOUBLE SELECTOR VALVE
    J.J.

    When I works, I works hard. When I sits and thinks, I goes to sleep.

    Git er done.

  3. #3
    New Member
    Join Date
    Apr 2013
    Posts
    5
    Location
    Manitoba
    Tractor
    Kubota b2920

    Default Re: Kubota b2920 rear remote

    Yes I have a loader now . That's what I was thinking. I could run hydraulic flow from the loader up down part of the joystick to selector valve which would split the flow either to loader cylinders or to the rear hoses. That way using the joystick control to work either loader or what ever I have plugged in to remotes, just not at same time .

  4. #4
    Super Star Member J_J's Avatar
    Join Date
    Sep 2003
    Posts
    18,922
    Location
    JACKSONVILLE, FL
    Tractor
    Power-Trac 1445, KUBOTA B-9200HST

    Default Re: Kubota b2920 rear remote

    I would think your best bet would be to use this valve.

    Surplus Center - 2 SPOOL 8 GPM PRINCE MB21BB5C1 DA VALVE

    Use the PB from the hyd block to feed the new remote valve.

    You still have full use of the loader.
    J.J.

    When I works, I works hard. When I sits and thinks, I goes to sleep.

    Git er done.

  5. #5
    New Member
    Join Date
    Apr 2013
    Posts
    5
    Location
    Manitoba
    Tractor
    Kubota b2920

    Default Re: Kubota b2920 rear remote

    Thanks for ur advice !

Similar Threads

  1. Rear Remote Kubota L39
    By jmanatee2 in forum Hydraulics
    Replies: 19
    Last Post: 05-15-2014, 10:34 AM
  2. What size rear rake for Kubota B2920
    By Green Guy in forum Attachments
    Replies: 15
    Last Post: 09-26-2012, 12:25 PM
  3. Kubota B2920 Custom Rear Hyd Mount
    By kbuckert in forum Hydraulics
    Replies: 3
    Last Post: 10-06-2011, 09:15 AM
  4. Strategy for rear hydraulics from Kubota B2920 FEL
    By Beesagood in forum Hydraulics
    Replies: 7
    Last Post: 06-11-2010, 01:33 PM
  5. B2920 Rear remote kit
    By ericher69 in forum Kubota Owning/Operating
    Replies: 13
    Last Post: 12-06-2008, 03:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2016 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.