FF110
Member
- Joined
- Oct 31, 2011
- Messages
- 30
- Location
- North Carolina
- Tractor
- John Deere 110 TLB, John Deere 4230, Satoh 650G
I replaced the loader valve on my jd 2550 with a prince valve and am having problems with the bucket raising up as the tractor runs. It is not very fast but over a few minutes it has raised up quite a bit. It is a closed hydraulic system so I put a cc plug in the valve and have tried to adjust it with no luck in fixing the problem. I also checked the cables leading from the cab to the valve and do not seem to be putting any pressure on the valves. Any ideas on how to fix this problem would be greatly appreciated.
Thanks
Thanks