Results 1 to 6 of 6
  1. #1
    Member
    Join Date
    Mar 2011
    Posts
    46
    Tractor
    Ford 1710

    Default B7100 Hydraulic pump pressure weak.

    The tractor is the later style b7100, and the pump I am refering to is the engine mounted hydraulic pump. I have afront end loader. The loader is a woods dual. I put a pressure guage on the loader. I can not get the pressure bove a about a 1000 psi. I have turned the loader relief valve in all the way and I also have taken the relief valve apart on the tractor 3 point control valve. Neither had any dirt or looked to have any wear. I tried shimming the tractor relief valve but it seemed to make no difference. The odd thing is I cant get the 3 point hitch to go into relief. I have a 3 point backhoe on the three point and I use it as a test object to lift. It is mounted ao that the three point hitch is restricted from moving up. Shouldnt the three point pressure relief squeal when it is lifting more than it can handle. Does anyone have any thoughts on this? Possibly the pump is weak. Can the hydraulic pump get weak where it just produces less pressure but isnt showing any leaks. Im not getting any air in the system either. Thanks for any help.I have very recently changed the fluid and used kubota fluid, kubota filter and cleaned the screens.
    Last edited by mauser1111; 04-22-2018 at 06:50 AM.

  2. #2
    Platinum Member
    Join Date
    Dec 2011
    Posts
    955
    Location
    Western Washington USA
    Tractor
    MM UTS and Homemade

    Default Re: B7100 Hydraulic pump pressure weak.

    Try checking the pressure at low RPM and then at high RPM. A worn pump will develop less pressure at low RPM. Did this problem start suddenly or gradually? Are there a lot of hours on the tractor? If so, the pump could just be worn out.

  3. #3
    Super Member Xfaxman's Avatar
    Join Date
    Feb 2013
    Posts
    8,059
    Location
    Meridian, OK
    Tractor
    Bobcat V417 Toolcat 5610 G TORO+Loader

    Default Re: B7100 Hydraulic pump pressure weak.

    How and where did you put the pressure gauge on the loader?
    Hold "Ctrl" (Control) and click on a picture or a Link, to open it in a new Tab.

    My Avatar, the TORO+Loader:
    Kwik-Way FEL and TORO Groundsmaster Put Together

    V417 Compact Telehandler: ​(This replaced my tractor): The best machine to do what I need a machine to do

  4. #4
    Member
    Join Date
    Mar 2011
    Posts
    46
    Tractor
    Ford 1710

    Default Re: B7100 Hydraulic pump pressure weak.

    The problem seemd to have happened all of a sudden. I teed the guage in the the line from the loader control valve to the base end if the curl cylinders. That is where the dual 145 loader owners manual stated to check loader pressure.

  5. #5
    Veteran Member
    Join Date
    Dec 2012
    Posts
    1,766
    Location
    Williamstown Ontario Canada
    Tractor
    Kubota M7040 Nuffield 465

    Default Re: B7100 Hydraulic pump pressure weak.

    Could you please provide some more history. A problem suddenly occurring is indicative of something other than wear.
    More likely flow and pressure arev being bled off and thus keeping overall system pressure low.

    When you say later B7100 is yours one whose WSM is in Kubotabooks.com ?

    When you bought the tractor, did it have the FEL on or did you add it?

    Are you using the kubota hydraulic block to get hydraulic flow and pressure for an additional implement i.e. FEL? Backhoe?

    How many hoses are on the FEL valve block? 6 or 7.

    Some photos showing the overall side, back and front of the tractor will help.

    Were any lines removed from the FEL valve at any time?

    You mention a 3 pt backhoe. How does this tie into the hydraulics?

    Dave

  6. #6
    Platinum Member
    Join Date
    Jun 2012
    Posts
    956
    Location
    East Tennessee
    Tractor
    John Deere 4200 w/backhoe, Ford 3000,580 Case backhoe

    Default Re: B7100 Hydraulic pump pressure weak.

    Check your crankcase oil level. I had a bad seal that was leaking hydraulic fluid into my crankcase.

Similar Threads

  1. Lenar 254 II Hydraulic pump weak
    By Greygoose in forum Hydraulics
    Replies: 69
    Last Post: 09-04-2017, 11:03 AM
  2. JD Hydraulic steering pump weak and grinding
    By jwjsr in forum Hydraulics
    Replies: 3
    Last Post: 04-15-2014, 10:12 PM
  3. JD Hydraulic steering pump weak and grinding
    By jwjsr in forum Hydraulics
    Replies: 0
    Last Post: 04-12-2014, 11:46 PM
  4. 1520 hydraulic pump weak?
    By 99k1500 in forum New Holland Owning/Operating
    Replies: 10
    Last Post: 04-11-2012, 07:17 AM
  5. Hydraulic pump weak
    By lakespirit in forum Chinese Tractors
    Replies: 80
    Last Post: 06-04-2008, 08:51 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2018 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.