Results 1 to 5 of 5
  1. #1
    New Member
    Join Date
    Apr 2018
    Posts
    11
    Location
    Cali
    Tractor
    Kubota RTV 900

    Default Kubota tractor front loader hydraulic issues

    So I came back last monday to find the tractor in need of repair or diagnosis. When switching from forks to bucket the two hydraulic cylindars seem to be not in sync with each other. It almost seems like something is bent. I do notice that when Im standing and looking at the front , comparing the two hydraulic shafts, one is extended farther out then the other.

    I spoke to the dealer and they said I could try draining the entire hydraulic system, in hopes to sync the two front cylindars.
    This seems like an awful lot of work.

    Was hoping someone with more experience can chime in and let me know what they think.

    Thanks

  2. #2
    New Member
    Join Date
    Apr 2018
    Posts
    11
    Location
    Cali
    Tractor
    Kubota RTV 900

    Default Re: Kubota tractor front loader hydraulic issues

    the issue is with the quick connect feature.

  3. #3
    New Member
    Join Date
    Apr 2018
    Posts
    11
    Location
    Cali
    Tractor
    Kubota RTV 900

    Default Re: Kubota tractor front loader hydraulic issues

    I have reposted this in kubota tractor area.

  4. #4
    Super Member Tx Jim's Avatar
    Join Date
    Jan 2007
    Posts
    7,238
    Location
    Coyote Flats,Tx
    Tractor
    JD 4255/Kubota M7040 HDC

    Default Re: Kubota tractor front loader hydraulic issues

    Some dealers don't have any common sense. Draining hyd oil won't get bucket cylinders into synchronization but gently placing quick tach bracket(if applicable) against something solid & putting a little pressure on the cyl that is most extended one can easily even the rod length of both cylinders.

  5. #5
    Platinum Member LouNY's Avatar
    Join Date
    Jul 2015
    Posts
    941
    Location
    Greenwich, NY
    Tractor
    Branson 8050, IH 574, Oliver 1550 Diesel Utility

    Default Re: Kubota tractor front loader hydraulic issues

    In the same vein if you get square with an immovable object with your quick attach then curl it down so that the side with cylinder more extended is contacting it solidly then curl it more till the other side makes contact you should be squared up again.
    We are saying the same thing just in different ways.

Similar Threads

  1. Replies: 3
    Last Post: 03-05-2015, 12:34 PM
  2. Front-End Loader Kubota A852 Front end loader for a Kubota L4610 HSTC tractor..
    By mac118 in forum Attachments
    Replies: 0
    Last Post: 02-03-2015, 02:48 PM
  3. Hydraulic problem on my Kubota LA Front End Loader
    By jayhawk238 in forum Attachments
    Replies: 12
    Last Post: 07-20-2014, 01:28 AM
  4. Kubota Front Loader issues
    By Big Al 1423 in forum Hydraulics
    Replies: 1
    Last Post: 11-25-2011, 08:22 PM
  5. Loader hydraulic issues on small JD tractor
    By Kernopelli in forum Hydraulics
    Replies: 7
    Last Post: 12-02-2008, 12:29 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2018 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.