Results 1 to 3 of 3
-
02-21-2007, 10:14 PM #1Gold Member
- Join Date
- Jun 2006
- Posts
- 330
- Location
- NW WA State
- Tractor
- 1980 AC 5020
PTO hydraulic pump on non-live pto....
isn't going to work, is it? Push in the clutch and the hydraulic system is dead.
Just looking for more hydraulic flow, maybe a little more pressure.
Monte
-
02-21-2007 10:14 PM # ADS
-
02-21-2007, 10:30 PM #2Epic Contributor
- Join Date
- Mar 2002
- Posts
- 42,524
- Location
- Central florida
- Tractor
- ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Re: PTO hydraulic pump on non-live pto....
It will work.. but as you mention.. dies when clutched.. what ya using it for? a backhoe? Should work fine like that.
Next bet is a aux pump if your tractor is setup for it..( for instance my NH is setup to remove a blank plate and add an engine mounted -gear driven- pump.. etc.. ) next than is a front stinger or crank mounted pump, then next would be a do-it-yourself engine mounted pump..like a pow steer pump.. etc..
Soundguy
-
02-21-2007, 11:14 PM #3Gold Member
- Join Date
- Jun 2006
- Posts
- 330
- Location
- NW WA State
- Tractor
- 1980 AC 5020
Re: PTO hydraulic pump on non-live pto....
I'm looking for a little more gpm's, and maybe a little more pressure. 1980 AC 5020, haven't looked for any auxiliary mounting. Probably not there anyway.
Originally Posted by Soundguy
Monte
Reply With Quote
