PTO hydraulic pump on non-live pto....

   / PTO hydraulic pump on non-live pto.... #1  

montejw

Gold Member
Joined
Jun 15, 2006
Messages
330
Location
NW WA State
Tractor
1980 AC 5020
isn't going to work, is it? Push in the clutch and the hydraulic system is dead. :( Just looking for more hydraulic flow, maybe a little more pressure.

Monte
 
   / PTO hydraulic pump on non-live pto.... #2  
It will work.. but as you mention.. dies when clutched.. what ya using it for? a backhoe? Should work fine like that.

Next bet is a aux pump if your tractor is setup for it..( for instance my NH is setup to remove a blank plate and add an engine mounted -gear driven- pump.. etc.. ) next than is a front stinger or crank mounted pump, then next would be a do-it-yourself engine mounted pump..like a pow steer pump.. etc..

Soundguy
 
   / PTO hydraulic pump on non-live pto....
  • Thread Starter
#3  
Soundguy said:
It will work.. but as you mention.. dies when clutched.. what ya using it for? a backhoe? Should work fine like that.

Next bet is a aux pump if your tractor is setup for it..( for instance my NH is setup to remove a blank plate and add an engine mounted -gear driven- pump.. etc.. ) next than is a front stinger or crank mounted pump, then next would be a do-it-yourself engine mounted pump..like a pow steer pump.. etc..

Soundguy

I'm looking for a little more gpm's, and maybe a little more pressure. 1980 AC 5020, haven't looked for any auxiliary mounting. Probably not there anyway.

Monte
 
 
Top