Results 1 to 6 of 6
  1. #1
    New Member
    Join Date
    Apr 2007
    Posts
    3
    Location
    Weaverville, NC
    Tractor
    Iseki TS 1910 F

    Default 3 point hitch stuck in UP position

    Iseki TS 1910F (4WD)
    I removed bushog from tractor, I wanted to put on my scrape blade. Changed the engine oil. I went to put on the blade, and the 3pt was stuck in UP position. I turned the star wheel by the seat both directions, no luck (by the way, I was pushing down on the hitch, as I was trying to lower it). Any suggestions here?
    PS......I was turning the speed adjustment wheel, both ways to see which way I needed to go to speed/slow the device........I heard a slight "pop", if this helps.
    I read this forum daily, and it has been really helpfull.....I figgered I'd ask the experts here first.
    Last edited by cherrypicker22; 07-19-2007 at 07:12 PM.

  2. #2
    Veteran Member EFC's Avatar
    Join Date
    Dec 2001
    Posts
    1,149
    Location
    Richland, Washington
    Tractor
    Enough

    Default Re: 3 point hitch stuck in UP position

    was your engine running? That model requires the engine to run for the 3 point to move up and down.

    Buck

  3. #3
    New Member
    Join Date
    Apr 2007
    Posts
    3
    Location
    Weaverville, NC
    Tractor
    Iseki TS 1910 F

    Default Re: 3 point hitch stuck in UP position

    Yes, engine was running.

  4. #4
    New Member
    Join Date
    Apr 2007
    Posts
    3
    Location
    Weaverville, NC
    Tractor
    Iseki TS 1910 F

    Default Re: 3 point hitch stuck in UP position

    OK, here's what happened. Yesterday, I guess I had turned the 3pt speed adjustment wheel too far out. It would not turn back in at all. I figgered I would sleep on it for the night (several prayers, too). It's like a valve or a rod had popped up and was preventing me from turning the wheel in any farther. Overnight whatever kept the wheel from turning in, had relaxed, and today the wheel turns in fine, and my 3pt is working fine!

  5. #5
    Platinum Member Grrrr's Avatar
    Join Date
    Jul 2007
    Posts
    800
    Location
    Devon, UK
    Tractor
    John Deere!

    Default Re: 3 point hitch stuck in UP position

    Glad you fixed it, just remember not to turn it so far next time or you might not be so lucky
    Jake

  6. #6
    New Member
    Join Date
    Oct 2012
    Posts
    2
    Location
    california
    Tractor
    MF 220-4

    Default Re: 3 point hitch stuck in UP position

    I was'nt so luckey. It's stuck up, and froze in the clockwise position. In this position the floating piston in the chamber is in the closed position and won't allow the fluid to circulate. I broke off the turn handle with a pipe wrench than drilled a hole put a nut on it drilled through it and place a key and tried turning it out. Broke what was left of the shaft off. Well I'm six bolts away from solving my problem hopefully. (cover) If not the local dealer gave me the worse case and maybe a o ring. You don't want to know. Anyone had the cover off. I can adjust the lift to work slow or fast from the inside. I hope. Anyone....anyone.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2016 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.