Iseki TS1910 or TS1610 owners?

[ctl]

I was needin a radiator,seat, oil filter and belts.Where the best place to shop for these items.

 

[tatra805]

It might seem far away but with todays courriers it should also work.

you can try [ M I C R O T R A C T O R S ]

They do have a lot of experience with export so shipping should not be a problem.

Spares are on stock most of the time.

 

[lens12]

I have a couple TS1610 parts tractors & can also supply some new parts.

 

[krc1110]

I have a Bolens G192 which is essentially a Iseki TS1910T and it has been great, I don't use it often but it is always ready to work for me.

 

[squibble]

Things like 2-spd. PTO vs 4-spd.,

i have recently bought a TS 1919, it has a selector for a 4 speed PTO but I can only select 2 of the speeds, (marked 2 and -4) the other 2 positions are totally solid, impossible to move the lever into either position, any ideas

 

[cowboy357]

i have recently bought a TS 1919, it has a selector for a 4 speed PTO but I can only select 2 of the speeds, (marked 2 and -4) the other 2 positions are totally solid, impossible to move the lever into either position, any ideas

You might check your linkage it could be as simple as giving it a good soaking with PB blaster or posible adjustment or something could be jamming them like a rock or wasp nest . You will probablly need to remove the left rear wheel & a metal cover to gain access if its like my TA 250 .

First pic is the location of the linkage arms , last two are of the inside of the gearbox where you can see the arms & forks if its more serious . Hope that helps .Good luck

 

[Brisxr6t]

Just trolling for owners of the following Iseki tractors...

TS 1610 2WD
TS 1910 2WD

Anybody?

Rick

ten years on, yes, we have both models in 2 wd! looking at another, which is how i came across this post!

 

[jfulps]

We are an Owners of and Iseki TS1610 Tractor. We have a few questions.

Where are the Fill and Drain locations for the Hydraulic Reservoir, Transmission Gear Box, and Rear Axle ?

Also, what types/weight of lubricant do each take ?

Are there any filters required for these items and Where are they located?

 

[Pat Hayes]

I see that your posts is over 5 years old but if you are still on here do you have a hood for a TS1610?

 

[Banjo22]

I have a TS1910 and am also wanting to know some basics. Please let me know If you find out the answer to your question.