Results 1 to 2 of 2
  1. #1
    New Member
    Join Date
    Sep 2005

    Default Alternator Wiring HELP

    Just now got my TL 2300 rewired with a totally new wiring harness........such an adventure..actually, pretty straight forward.....some differences from ANY schematic that I saw, purchased, or was given...MAJOR differences; but nothing that common sense couldnt figure asking for one last bit of help......the alternator has 2 wires that connect to it..a large white cable that goes to the key switch and a red and white smaller one that goes I think to the fuse panel....the alternator has a two connectors on the rear side of the alternator.......while facing forward looking at these connectors, one is at about 3 oclock and the other at 6.......could YOU please go out and look and tell me which wire goes to which connector......yes I tried to mark them as I took it apart; but these wires along with the starter were fried and couldnt really tell which was which....THANKS........

  2. #2
    New Member
    Join Date
    Mar 2011
    Iseki TS2200

    Default Re: Alternator Wiring HELP

    I too need to replace my TS2200 alternator. Hear a GM one will work. Now the GM one has only a single wire (which should match the large white one on my tractor) what are the others for?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
© 2018 TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.