Results 1 to 10 of 10
  1. #1

    Default iseki 1610

    can anyone tell me anything about this tractor. weight, hp any info will help. THANKS

  2. #2

    Default Re: iseki 1610

    I just bought a Iseki TS 1610. Its a real nice little tractor.
    Dealer told me it was 20hp. I think I am going to like it just fine. Seems to have good power and everything works just great. Can anyone give me an Oil Filter No. ?

  3. #3

    Default Re: iseki 1610

    Hey.....usually, and I am no expert, the first two numbers of the model number are the horsepower rating. There is another rating at the PTO; but I havent gotten that one figured out. Perhaps a more knowledgeable operator can give us insight.....Dennis

  4. #4

    Join Date
    Jun 2002
    Posts
    81
    Location
    Oklahoma
    Tractor
    iseki ts1610

    Default Re: iseki 1610

    I have a Fram PH3600 on my TS1610

  5. #5
    Platinum Member buppy69's Avatar
    Join Date
    Mar 2002
    Posts
    788
    Location
    Western NC
    Tractor
    Hinomoto E2804, Hinomoto N239,

    Default Re: iseki 1610

    The first two numbers of the model number are PTO HP. To get engine HP, multiply PTO HP X 1.3.

    Eugene

  6. #6

    Default Re: iseki 1610

    I found a small plate on my TS 1610 that says
    16 PS 2300rpm. Does any one know if this is the Pto hp?

  7. #7

    Join Date
    Jun 2002
    Posts
    81
    Location
    Oklahoma
    Tractor
    iseki ts1610

    Default Re: iseki 1610

    I was told that my TS1610 was 16hp at the pto and around 20-21 for the engine. I have really put some loads on mine and all it does is spin all four tires, that's plenty of HP for it's weight in my opinion. They seem to have plenty of gears for whatever job it is doing, as long as you don't get in a hurry.

  8. #8

    Default Re: iseki 1610

    hey guys, thanks for all the info. I was looking at 2 small tractors.the mf 1010 and Iseki 1610. I brought the 1610. I will pick up next week. Thanks again!

  9. #9
    Platinum Member buppy69's Avatar
    Join Date
    Mar 2002
    Posts
    788
    Location
    Western NC
    Tractor
    Hinomoto E2804, Hinomoto N239,

    Default Re: iseki 1610

    The MF1010 is the same as a Hinomoto C142/144. 14 PTO HP. The Iseki is a good choice.

    Eugene

  10. #10

    Default Re: iseki 1610

    According to Eugenes formula if the 1610 has a 16hp PTO.
    Then the HP of the 1610 would be 20.8 HP.
    1.3 X 16 = 20.8.
    Thanks a lot Guys.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.