Info needed on Iseki TS2510 hydralics

[Daddyd]

Lifting speed is way too fast, a slight movement of the up lever sends the implement jerking up too fast. I have changed hydrualic fluid and cleaned suction line screen, made no difference. Also, is there an adjustment for the lifting speed control? Thanks, Daddyd

[Marcle]

is there an adjustment for the lifting speed control? Thanks, Daddyd

On some Iseki's there's a little 'T' handle under the seat that changes the lift speed.

[Daddyd]

Thanks Marcel I'll look for the T handle.

[NHmitch]

The T handle usually changes the down speed, but not the lift speed, but thats a good suggestion. I know that on some Iseki's there is also a knob below your behind your knees when you sit down, and that will control the lift speed. It's tough when it is all in Japanese. You may just have to play with some of the knobs.

[lens12]

Usually the problem is too slow a lift. You can put a restricter valve in the line. Email me if you can't find one.

[Daddyd]

Thanks Mitch & Leonard for your replys,I'll let you know what happens when i find time to work on my tractor, maybe this week;

Tim