Results 1 to 3 of 3
-
01-16-2013, 06:46 AM #1New Member
- Join Date
- Jan 2013
- Posts
- 1
- Location
- tauranga, bay of plenty
- Tractor
- iseki tu19f
Identifying my Iseki?
Hi all
Hoping some knowledgeable person can help me identify what model my friends fire damaged Iseki tractor is
. The only confirmed information I can supply is:
- Iseki is stamped on the block
- The Engine is a E3AF1
- Chassis reference is TU19F-05875
Im going to go out on a limb here and guess the TU19xx is the important bit, but unless this is short for TU1900F im out of ideas. Im also told by the owner who was looking at pics on the net that it looks very similar to a TU145F.
Any help would be much appreciated, if I can confirm the model then tracking down parts, or at least an electrical schematic for the hydraulics, might just be possible!
cheers
-
01-16-2013 06:46 AM # ADS
-
01-18-2013, 03:23 PM #2Platinum Member
- Join Date
- Mar 2012
- Posts
- 793
- Location
- SW New Hampshire
- Tractor
- Bolens G154/IsekiTX1300F
Re: Identifying my Iseki?
Hi,
This photo below is a Iseki TU19F, or it is also referred to as a TU200F. See if the photo below looks like your tractor. The F refers to 4WD, and the TU200 corresponds with the TU19F Hope this helps a bit!

Mitch

-
02-03-2013, 08:49 PM #3Veteran Member
- Join Date
- Apr 2000
- Posts
- 1,529
- Location
- Dixon, Il
Re: Identifying my Iseki?
The E3AF1 was used on the Japanese models TU1700/1900/2100, TL1900, TU180/185/200/205. Export models would have a different model designation..
Similar Threads
-
Identifying my MF tractor
By Eagles eye in forum Massey Ferguson Owning/OperatingReplies: 9Last Post: 09-29-2012, 06:57 AM -
NEED HELP IDENTIFYING
By cqlawncare in forum RototillersReplies: 5Last Post: 07-19-2010, 03:26 PM -
Help identifying
By cef2lion in forum 2-Wheeled TractorsReplies: 5Last Post: 07-19-2010, 08:47 AM -
Need help identifying
By Lee2010 in forum General Lawn & GardenReplies: 1Last Post: 09-07-2009, 04:22 PM -
Need help identifying
By Degree in forum Chinese TractorsReplies: 26Last Post: 07-02-2004, 11:07 AM


Reply With Quote

