Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12
  1. #11
    New Member
    Join Date
    Apr 2013
    Nottingham, UK
    Iseki tx2160

    Default Re: Iseki TX2160 hydraulics

    Just another update if anyone has any thoughts or pointers.

    I plugged the gauge into the pump output and it was showing around 500PSI regardless of lifting the hitch or not. I've now plugged a shutoff valve after the gauge and it was showing around 1500psi after closing the valve a bit. This leads me to suspect the pump is fine and able to get upto pressure. So the problem is upstream of the pump, I'm happy with the cylinder as the hitch does not drop with the engine off.

    The downside is that I'm now stuck. I've cleaned the relief valve ontop of the cylinder and it looks to be working as far as I can tell. Stalling the hitch does not make any difference to the base 500psi pressure.

    I suspect now that I've got a leak somewhere, possible the spool valve? I've taken it to pieces and cleaned it all up, can't see anything that looks wrong. There appears to be another relief valve on the spool, again it looks ok to me.

    Any thoughts appreciated.


  2. #12
    Platinum Member NHmitch's Avatar
    Join Date
    Mar 2012
    SW New Hampshire
    Bolens G154/IsekiTX1300F

    Default Re: Iseki TX2160 hydraulics


    Sorry to hear that you are still having issues. Attached are the only two pages from the service manual that I have about the hydraulics. I wish that I had a better understanding of the hydraulics to help you more, but I usually have to refer to the manual when it comes to the 3point lift. Can you possibly use a mechanics stethoscope to help find the leak? Anyways, I hope that this helps a bit. Sorry for the poor resolution...

    Attached Thumbnails Attached Thumbnails Iseki TX2160 hydraulics-hyd-jpg   Iseki TX2160 hydraulics-hyd2-jpg  

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Iseki TX2160
    By richb in forum Iseki
    Replies: 8
    Last Post: 04-04-2013, 07:38 PM
  2. Oil & Fuel Iseki TX2160
    By johnbp in forum Iseki
    Replies: 8
    Last Post: 11-10-2010, 11:22 PM
  3. Iseki TX2160
    By shvl73 in forum Grey Market Tractors
    Replies: 4
    Last Post: 10-11-2010, 04:18 PM
  4. Iseki TX2160
    By shvl73 in forum Iseki
    Replies: 2
    Last Post: 11-30-2006, 06:48 AM
  5. Iseki Field Boss Tx2160
    By Anonymous Poster in forum Grey Market Tractors
    Replies: 1
    Last Post: 06-02-2003, 02:32 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
© 2018 TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.