Results 1 to 9 of 9
  1. #1
    Bronze Member
    Join Date
    Jun 2012
    Posts
    68
    Location
    Scotland
    Tractor
    Iseki TX1510

    Default Iseki TX1510 」 Point Hitch Category

    the operators manual says the 3PH is a JIS -0 (which I assume to mean Cat 0); the measurements suggest Cat 1

    can someone confirm which is correct as I'm looking to buy EZ Hitch and obviously need to correct size

    many thanks

  2. #2
    Platinum Member NHmitch's Avatar
    Join Date
    Mar 2012
    Posts
    924
    Location
    SW New Hampshire
    Tractor
    Bolens G154/IsekiTX1300F

    Default Re: Iseki TX1510 」 Point Hitch Category

    The tractor is a Cat1, however some cat one implements push the lift arms very close to the tires. The Cat1 EZ hitch will work fine. I run a Cat 1 post hole digger, Cat 1 wood splitter, Cat 1 single plow, Cat 1 dirt scoop, Cat 1 carry all, and a Cat 1 boom arm behind mine. JIS usually stands for Japanese Industrial Standard, and covers the specifications for the Standard form of specifications of agricultural wheeled tractors. Hope this helps a bit!
    Mitch

  3. #3
    Bronze Member
    Join Date
    Jun 2012
    Posts
    68
    Location
    Scotland
    Tractor
    Iseki TX1510

    Default Re: Iseki TX1510 」 Point Hitch Category

    As ever that helps a great deal thank you Mitch.

    Just looking at my 3PH and some of the implements (and please do correct me anyone if I'm wrong)that lower pins on some implements
    can be reversed from pointing outwards to pointing inwards to fit?

    Peter

  4. #4
    Bronze Member dantnz's Avatar
    Join Date
    May 2012
    Posts
    63
    Location
    Isle of Wight, UK
    Tractor
    Iseki TX1500 & TX1300F

    Default Re: Iseki TX1510 」 Point Hitch Category

    Yep, I do that on my topper otherwise the link can clip the tires going round sharp turns.

  5. #5
    Bronze Member
    Join Date
    Jun 2012
    Posts
    68
    Location
    Scotland
    Tractor
    Iseki TX1510

    Default Re: Iseki TX1510 」 Point Hitch Category

    Cheers for that Dan hows things with your blue machine?

  6. #6
    Bronze Member dantnz's Avatar
    Join Date
    May 2012
    Posts
    63
    Location
    Isle of Wight, UK
    Tractor
    Iseki TX1500 & TX1300F

    Default Re: Iseki TX1510 」 Point Hitch Category

    Quote Originally Posted by ballaterach View Post
    Cheers for that Dan hows things with your blue machine?
    Not going anywhere yet, but I've found a new rear end, just now the small matter of getting to the Island!

  7. #7
    Elite Member TomSeller's Avatar
    Join Date
    Jan 2013
    Posts
    3,017
    Location
    kalamazoo and timbuktu
    Tractor
    Many

    Default

    I believe it is a Cat1-limited. As in limited travel but it uses Cat1 pin sizes.

  8. #8
    Bronze Member
    Join Date
    Jun 2012
    Posts
    68
    Location
    Scotland
    Tractor
    Iseki TX1510

    Default Re: Iseki TX1510 」 Point Hitch Category

    Thanks Tom

  9. #9
    Elite Member TomSeller's Avatar
    Join Date
    Jan 2013
    Posts
    3,017
    Location
    kalamazoo and timbuktu
    Tractor
    Many

    Default

    Quote Originally Posted by ballaterach View Post
    Thanks Tom
    No problem. This goes into more detail
    http://www.tractorbynet.com/forums/a...1-cat-1-a.html

Similar Threads

  1. How low do your category 0 3-point hitch lift arms go?
    By SilverLakeFab in forum Attachments
    Replies: 20
    Last Post: 04-04-2013, 11:27 PM
  2. Iseki TX1510 3 Point Hitch Lifting weight and Towing Weight
    By ballaterach in forum Owning/Operating
    Replies: 0
    Last Post: 01-22-2013, 11:08 AM
  3. 3-Point Hitch Category of my three point hitch
    By Errol in forum Chinese Tractors
    Replies: 8
    Last Post: 02-25-2012, 11:46 PM
  4. Category 1 Three Point Hitch Specifications
    By trlong in forum Build-It Yourself
    Replies: 6
    Last Post: 09-19-2004, 11:10 PM
  5. Category 1 Three Point Hitch Specifications
    By trlong in forum News/Feedback
    Replies: 0
    Last Post: 09-19-2004, 05:08 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.