Page 1 of 3 123 LastLast
Results 1 to 10 of 26
  1. #1
    Platinum Member NHmitch's Avatar
    Join Date
    Mar 2012
    Posts
    931
    Location
    SW New Hampshire
    Tractor
    Bolens G154/IsekiTX1300F

    Default G154/TX1300F Rims Update**

    There was a thread on here last summer about replacement rims for the Bolens Series/Iseki TX series front and rear rims. Right about the same time, I accidentally cracked my right front rim when I replaced my tire while not using a torque wrench. (I have since bought one, and I use it religiously). I had a very hard time finding the correct front rims, and I had to do a ton of research. What I found was that the rims are the same side as a particular kubota rim. This is probably because both tractors are produced in Japan, and 30 years ago, they probably shared parts suppliers. The rims fit perfectly, however when I had the tire mounted , I discovered that the rim actually sits about 2 inches farther out than the original rim. This is allright with me, because it actually offers more stability and widens the front footprint of the tractor. The rims are Kubota part #70000-00024. Just about any Kubota dealer can order them, and with a bit of white paint, you are all set. They are also a touch thicker than the original, but only by a few mm.
    This is the new rim:

    This is the new rim, and the 2 inch distance it extends, and below is the original OEM rim that is closer to the tractor.

    Mitch

  2. #2
    Bronze Member
    Join Date
    Mar 2013
    Posts
    50
    Location
    Brisbane Australia
    Tractor
    Iseki TX2160f, 196X Ford 3000 Select-O-Speed

    Default Re: G154/TX1300F Rims Update**

    Good stuff, cheers.
    how much were they if you don't mind me asking?

  3. #3
    Platinum Member NHmitch's Avatar
    Join Date
    Mar 2012
    Posts
    931
    Location
    SW New Hampshire
    Tractor
    Bolens G154/IsekiTX1300F

    Default Re: G154/TX1300F Rims Update**

    Thanks so much! They were $110 US Dollars/$106 AUD. They are pretty much the same most places I have looked, including overseas. There is also a kubota Rim that matches the rear rim, so good options if you need a new rim!
    Mitch

  4. #4
    Bronze Member
    Join Date
    Mar 2013
    Posts
    50
    Location
    Brisbane Australia
    Tractor
    Iseki TX2160f, 196X Ford 3000 Select-O-Speed

    Default Re: G154/TX1300F Rims Update**

    Thanks, that's pretty good. One of my front rims is pretty rusted.

  5. #5
    Bronze Member
    Join Date
    Mar 2013
    Posts
    50
    Location
    Brisbane Australia
    Tractor
    Iseki TX2160f, 196X Ford 3000 Select-O-Speed

    Default Re: G154/TX1300F Rims Update**

    Mitch. Just confirming these will fit my 2160f?

    Can you recommend somewhere in the US to buy from as Australia is a rip off most of the time.

    Cheers.

  6. #6
    Bronze Member
    Join Date
    Mar 2013
    Posts
    50
    Location
    Brisbane Australia
    Tractor
    Iseki TX2160f, 196X Ford 3000 Select-O-Speed

    Default Re: G154/TX1300F Rims Update**

    Also the kubota dealers here don't recognize that part number.

  7. #7
    Platinum Member NHmitch's Avatar
    Join Date
    Mar 2012
    Posts
    931
    Location
    SW New Hampshire
    Tractor
    Bolens G154/IsekiTX1300F

    Default Re: G154/TX1300F Rims Update**

    Those will definitely fit your tractor. I bought one of my rims from Eberhard Equipment | Earning your trust. Everyday. For 67 years. They were great about shipping it to me about 3500 miles away. You could ask the kubota dealer if they can get the rim for a Kubota B7100, B6100, B5100. Those are the tractors the rim comes from. If you do a search for the rim number, you should be able to find quite a few dealers here that carry these rims. I found that Kubota sets the price here, and they seem to all be priced the same here. Hope that helps you a bit!
    Mitch

  8. #8
    New Member
    Join Date
    May 2013
    Posts
    4
    Location
    Murphy NC
    Tractor
    Bolens G154 iskeiTX1300F

    Default Re: G154/TX1300F Rims Update**

    Could you tell me how or where I could get a set of wheels and turf tires I have a g154 TX1300F my uncle passed away and left it to me.and we couldn't find any kind of book work on it.

  9. #9
    New Member
    Join Date
    May 2013
    Posts
    4
    Location
    Murphy NC
    Tractor
    Bolens G154 iskeiTX1300F

    Default Re: G154/TX1300F Rims Update**

    Thanks but the kubota dealer here don't act like they wanted to even talk about the tractor. they don't even sale tires there.but thank you again.

  10. #10
    Elite Member TomSeller's Avatar
    Join Date
    Jan 2013
    Posts
    3,820
    Location
    timbuktu
    Tractor
    Many

    Default

    Try these guys. They told me once they make any bolt pattern. The wheels are 16" and 12" like the Iseki/Bolens G154 and wide for turf or just wide tires.

    http://www.hoyetractor.com/mm5/merch..._Code=TTK-1500

Page 1 of 3 123 LastLast

Similar Threads

  1. Bolens G154 / Iseki tx1300f
    By fxrs55 in forum Iseki
    Replies: 218
    Last Post: 09-02-2014, 08:55 PM
  2. 2 oil seals for a Bolens G154 / ISEKI TX1300F
    By hutch5947 in forum Parts/Repairs
    Replies: 10
    Last Post: 07-10-2012, 02:27 PM
  3. G154 / TX1300F Wiring Harness
    By MyG154 in forum Iseki
    Replies: 7
    Last Post: 06-29-2012, 04:05 PM
  4. Replies: 33
    Last Post: 06-15-2012, 11:20 PM
  5. Iseki Tx1300F/ Bolens G154
    By KDCRacer in forum Bolens
    Replies: 2
    Last Post: 12-03-2003, 06:54 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.