Results 1 to 4 of 4
  1. #1

    Default Iseki T6500 (white 2-62)

    My crankcase is full to the top when I check the oil, although I never over-filled. I was told the hydraulic pump/ or pumps mounted on the left side of motor are leaking into crankcase and need new seals or rebuild. Anyone ever hear of this or have this problem before? Thanks

  2. #2
    Super Member JerryG's Avatar
    Join Date
    Apr 2000
    Posts
    7,203
    Location
    Northwest Arkansas
    Tractor
    MF 1440-4 PowerShuttle

    Default Re: Iseki T6500 (white 2-62)

    Sounds like you have a seal out of your fuel pump or your hydraulic pump.

  3. #3

    Default Re: Iseki T6500 (white 2-62)

    Any way to isolate which one, I also have 2 hydraulic pumps mounted back to back on the left side, any way to isolate which one is leaking? The engine is a 4 cyl. Isuzu.
    Thanks

  4. #4
    Silver Member
    Join Date
    Apr 2002
    Posts
    247
    Location
    Independence, MO.
    Tractor
    Iseki 3200F, kubota L245DT

    Default Re: Iseki T6500 (white 2-62)

    If it the little pump on the side it is power stearing check the oil level in the power stearing.it will be low. If it is the main pump it will take oil out of the transmision or hydrualic tank. If it is fuel you should be able to smell it in the oil.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.