Results 1 to 4 of 4
  1. #1

    Join Date
    Nov 2004
    Posts
    8
    Location
    Lebec, CA
    Tractor
    Iseki / TU 1700 F

    Default TU1700f PTO RPM\'s

    I just bought a 48 inch Bush Hog and states it requires 540 RPM input off the PTO. Does anyone know what the RPM's are for the PTO on a TU1700f is. There are three speeds and it probably says what they are but I don't read, write, or speak, chinese.

    Thanks you guys.

    Mike

  2. #2
    Veteran Member
    Join Date
    Apr 2000
    Posts
    1,595
    Location
    Dixon, Il

    Default Re: TU1700f PTO RPM\'s

    Put it in the #1 speed . The slowest.

  3. #3

    Join Date
    Jun 2005
    Posts
    68
    Location
    Woodbridge, Virginia
    Tractor
    D3250, YM1802D, & 8N(Snow removal and restoration fun)

    Default Re: TU1700f PTO RPM\'s

    Mike,
    On the Japanese tractors you will always want to use the 1st gear for the PTO. Almost all((I hesitate to say all, but I have never seen one)) US implements for utility tractors are made for 540 RPM. I would also run it at about 2000 rpm. The 2nd and 3rd gears are used mostly for roto-tillers and other Japaneese implements that turn much faster. They are extremely popular over there for the rice farming. You don't see many around but the Yanmar tillers are great and can use the higher turning speeds.

    Best Regards,
    Bob

  4. #4

    Join Date
    Nov 2004
    Posts
    8
    Location
    Lebec, CA
    Tractor
    Iseki / TU 1700 F

    Default Re: TU1700f PTO RPM\'s

    Hey you Guys,
    Thanks a lot for the input. That really helps a lot!


    Mike

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.