Results 1 to 6 of 6
  1. #1

    Default Broken Grease Points

    Hi! I broke a grease point off of my tiller yesterday....can anyone tell me a good place to order something like this online?

    I also need a plug for the oil pan on my TS 1610.

    Thanks, Rich Deming

  2. #2
    Elite Member DieselPower's Avatar
    Join Date
    Sep 2006
    Posts
    2,761
    Location
    Fairfield, PA
    Tractor
    JD 3020, JD 4230, JD 7410, JD 2440, MF 750, NH LS170

    Default Re: Broken Grease Points

    Grease point? Do you mean a grease fitting?

  3. #3
    Super Member texasjohn's Avatar
    Join Date
    Oct 2005
    Posts
    5,609
    Location
    Central Texas, Jarrell
    Tractor
    Kubota Grand L5030HSTC

    Default Re: Broken Grease Points

    If you mean grease fitting, then these are available at auto parts houses.

    I went into an old line parts store a year ago when I needed a new grease zerk, found the one I wanted from a supply drawer (there are numerous sizes, lengths, straight, 90 degrees, 45 degrees, thread sizes, etc.) and when I went to pay they just said..oh, you only want one... just take it, not worth writing up a ticket... come see us again when you need something else.

    I said thanks and do go back.

    Welcome to TBN... and suggest expanding your personal information... it helps answering questions, sometimes.
    Joy is having the tools you need and needing the tools you have!

    Kubota 5030 HSTC, BB, Danueser PHD, LA853 QA HD FEL w JD toothbar, 3pt chisel, 3 pt disk, 6' shredder, Kubota FEL hay spike, 3pt hay fork w carryall, Kubota RTV 1140

  4. #4

    Default Re: Broken Grease Points

    Yes--I guess I do mean grease fitting. Don't know where I got grease point...I'm kind of new to these pieces of equipment. I was greasing up the tiller for the first time and when I tried to pull the grease gun off the fitting, it broke off.

    I'll try a parts store today. Thanks!

    p.s. I'll also try to figure out how to expand personal info when I get a chance.

  5. #5
    Super Member texasjohn's Avatar
    Join Date
    Oct 2005
    Posts
    5,609
    Location
    Central Texas, Jarrell
    Tractor
    Kubota Grand L5030HSTC

    Default Re: Broken Grease Points

    Removal of the old one will depend on how it broke and how accessable it is.
    Best case, you can get a small wrench or socket on it's hex fitting and back it out of the hole. If it broke below the hex fitting and only the threads remain in the hole, likely you will need a small bolt remover to catch it and remove. Good luck!
    Joy is having the tools you need and needing the tools you have!

    Kubota 5030 HSTC, BB, Danueser PHD, LA853 QA HD FEL w JD toothbar, 3pt chisel, 3 pt disk, 6' shredder, Kubota FEL hay spike, 3pt hay fork w carryall, Kubota RTV 1140

  6. #6
    Bronze Member BBB's Avatar
    Join Date
    Nov 2006
    Posts
    59

    Default Re: Broken Grease Points

    If your talking about zerks, Harbor Freight sells an assortment kit for under $10.00. They have two assortments 1 standard & 1 metric.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.