JD rotory cutter

buddygunzz · 05-26-2008, 03:04 PM

any info on this would be great.....sereial# AW 25206 A88. don't know how old or anything about it only that is 4' cutter and John Deere...need to figure out how to adapt to IMATCH also.

thanks

joecdeere · 05-27-2008, 07:51 PM

Buddy, did that number come off a Deere serial number tag, or off the gearbox?
AW25206 is the part number for a gearbox on the 4' model 403 & the 5' model 503, this was built in the late 80's and early 90's. I also show a model 403 with a serial number ending in 25206, but would be W00403X025206, it was built in 1992

buddygunzz · 05-27-2008, 08:20 PM

thanks joe....the number was off the gearbox so it's a 403 model......looked for blades and they are the same as the LX4, so parts are still avalible.
any ideas for the IMATCH

thanks

joecdeere · 05-27-2008, 08:56 PM

you're gonna have to make it fit! that was built long before there was a "standard" measurement

kennyd · 05-27-2008, 09:03 PM

Got a welder or a friend with one?

buddygunzz · 06-01-2008, 07:03 PM

got it to fit like a glove

...this is my first rotary cutter, any tips or mantinance on the slip clutch?
found the tag# W00403X012558 what year?
thanks

05-26-2008, 03:04 PM	#1 (permalink)
buddygunzz New Member Join Date: Feb 2007 Location: wi. Posts: 23	JD rotory cutter any info on this would be great.....sereial# AW 25206 A88. don't know how old or anything about it only that is 4' cutter and John Deere...need to figure out how to adapt to IMATCH also. thanks __________________ John Deere 2305, 62''MMM, 200CX Loader, I-Match, Frontier RB2060, Ballast Box, Tooth Bar(homemade),Aux Work Lights, 403 JD Rotary Cutter, Towbehind Sprayer, STIHL 290 20'' bar, STIHL 210 16'' bar, STIHL FR55S, STIHL Power Broom

05-27-2008, 07:51 PM	#2 (permalink)
joecdeere Silver Member Join Date: Apr 2002 Location: Georgia Posts: 232	Re: JD rotory cutter Buddy, did that number come off a Deere serial number tag, or off the gearbox? AW25206 is the part number for a gearbox on the 4' model 403 & the 5' model 503, this was built in the late 80's and early 90's. I also show a model 403 with a serial number ending in 25206, but would be W00403X025206, it was built in 1992

05-27-2008, 08:20 PM	#3 (permalink)
buddygunzz New Member Join Date: Feb 2007 Location: wi. Posts: 23	Re: JD rotory cutter thanks joe....the number was off the gearbox so it's a 403 model......looked for blades and they are the same as the LX4, so parts are still avalible. any ideas for the IMATCH thanks __________________ John Deere 2305, 62''MMM, 200CX Loader, I-Match, Frontier RB2060, Ballast Box, Tooth Bar(homemade),Aux Work Lights, 403 JD Rotary Cutter, Towbehind Sprayer, STIHL 290 20'' bar, STIHL 210 16'' bar, STIHL FR55S, STIHL Power Broom

05-27-2008, 08:56 PM	#4 (permalink)
joecdeere Silver Member Join Date: Apr 2002 Location: Georgia Posts: 232	Re: JD rotory cutter you're gonna have to make it fit! that was built long before there was a "standard" measurement

05-27-2008, 09:03 PM	#5 (permalink)
kennyd Elite Member Join Date: Jul 2003 Location: Westminster, MD Posts: 2,956	Re: JD rotory cutter Got a welder or a friend with one? __________________ JD 4110HST FEL, 60" MMM, 60" Rear Blade, Ballast Box, Imatch, #380 Snow Plow, FEL Forks, Goossen 3PH Chipper/Shredder, and much more "stuff"

06-01-2008, 07:03 PM	#6 (permalink)
buddygunzz New Member Join Date: Feb 2007 Location: wi. Posts: 23	Re: JD rotory cutter got it to fit like a glove...this is my first rotary cutter, any tips or mantinance on the slip clutch? found the tag# W00403X012558 what year? thanks __________________ John Deere 2305, 62''MMM, 200CX Loader, I-Match, Frontier RB2060, Ballast Box, Tooth Bar(homemade),Aux Work Lights, 403 JD Rotary Cutter, Towbehind Sprayer, STIHL 290 20'' bar, STIHL 210 16'' bar, STIHL FR55S, STIHL Power Broom

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode