62C MOWER QUESTION

JDFORLIFE · 07-12-2008, 12:12 AM

Just got my new tractor today 2305 with 62 mmm, it has the independent lift. The problem I am having is how do you get it to lock in the up position,I got the knob turned (finally) to the lock position and try and let the pressure off and the mower drops???????? Please help the newbie and great forum Thanks Tim D.

does it have anything to do with the rear draft arms.

shot_gun · 07-12-2008, 07:40 AM

Lift the mower to full hieght with the hydraulics. Then turn the knob fully clock wise. Let the mower down till it stops. It's about a 1/2 to 3/4 inch drop. You cannot turn the knob with the mower deck hanging on the depth control linkage. If it drops more than the 1/2 to 3/4 of an inch it may need adjustment.

07-12-2008, 12:12 AM	#1 (permalink)
JDFORLIFE New Member Join Date: Jul 2008 Location: Excelsior Springs, MO Posts: 13	62C MOWER QUESTION Just got my new tractor today 2305 with 62 mmm, it has the independent lift. The problem I am having is how do you get it to lock in the up position,I got the knob turned (finally) to the lock position and try and let the pressure off and the mower drops???????? Please help the newbie and great forum Thanks Tim D. does it have anything to do with the rear draft arms. __________________ (2008) 2305 18.5 HRS 53FEL, 62C MMM, BB1048L, HOME MADE BALLAST CONCRETE ROLLER, 18 FOOT TANDEM TRAILER WITH 2 5,000 POUND AXLES AND FOLDING RAMP

07-12-2008, 07:40 AM	#2 (permalink)
shot_gun Gold Member Join Date: Mar 2008 Location: NJ Posts: 272	Re: 62C MOWER QUESTION Lift the mower to full hieght with the hydraulics. Then turn the knob fully clock wise. Let the mower down till it stops. It's about a 1/2 to 3/4 inch drop. You cannot turn the knob with the mower deck hanging on the depth control linkage. If it drops more than the 1/2 to 3/4 of an inch it may need adjustment. __________________ S_G Remember nobody ever complained about having too much horsepower!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode