pclausen
Veteran Member
So I finally took the plunge and got a factory fresh 2012 5085M on the way.
It will be equipped with the following factory options:
And I'm picking up the following "dealer attachments" that I will be installing myself:
And it will have a loader that will be configured as follows:
And last but not least, it will come with the following attachments:
I opted not to get the side mirrors and will instead get a rear camera with a monitor.
I also will start out with no liquid ballast in the rears and see how things work out. The larger ballast box filled with Portland Cement should help with grapple/loader work. I want to run light footed for moving duties, taking advantage of the radials. If conditions warrant, I'll add rear weights (loader/grapple work), front weights (Bush Hog 3209 work), and as a last resort, liquid ballast (16-3 plow work?).
I'm excited!
It will be equipped with the following factory options:
- MFWD (4 Wheel Drive)
- Deluxe Cab
- Instructional Seat
- Deluxe Corner Post Exhaust
- 16F/16R PowrReverser Transmission - 540/540E
- Electrohydraulic (EH) with remote LH fender control
- Triple Rear Deluxe Valve with Lever Controls
- Triple Mid Valve with Joystick Control
- 420/85 R34 R1W Radial (Michelin Agribib)
- 13.6R24 125A8 R1W Radial (Michelin Agribib)
- 63mm Hitch Lift Cylinders
- High Capacity Fuel Tank
- Front Weight Support
- Cold Weather Package
And I'm picking up the following "dealer attachments" that I will be installing myself:
- Rear Fender Extension Kit
- Electrohydraulic (EH) Hitch Right Fender Switch Kit
- Oil Collection System
- Auxiliary Work Light Kit (2x)
- Brake Light Kit
- PowrReverser Modulation Control Kit
- Service Horn
And it will have a loader that will be configured as follows:
- H260 Standard Loader
- Mounting Frame
- Mechanical Self-Leveling - 3-Function
- 3-Function Hoses and Parts
- 3-Function Single Point Hydraulic Connection
- Hood Guard
- Large Ballast Box
- Global Carrier
- 1850 MM (73 In.) Global Heavy Duty Bucket
And last but not least, it will come with the following attachments:
- Woods SG100 Stump Grinder
- Bush Hog 3209 Rotary Cutter
- Frontier AV20G Root Grapple 77"
- CB Pallet Forks
I opted not to get the side mirrors and will instead get a rear camera with a monitor.
I also will start out with no liquid ballast in the rears and see how things work out. The larger ballast box filled with Portland Cement should help with grapple/loader work. I want to run light footed for moving duties, taking advantage of the radials. If conditions warrant, I'll add rear weights (loader/grapple work), front weights (Bush Hog 3209 work), and as a last resort, liquid ballast (16-3 plow work?).
I'm excited!
Last edited: