JD 1026R

   / JD 1026R #1  

x everything

New member
Joined
May 21, 2011
Messages
17
Location
Moose Jaw, Saskatchewan
Tractor
JD 2305
Thinking of buying a 1026R with a QuikTrak Mower.
My question is would I be able to use a Front Mount Snow Blower on the 1026R?
Thanks
 
   / JD 1026R
  • Thread Starter
#4  
Need a little more info, if you don't mind.
Is your 60" mmm the drive over Quik Trak?
I have read somewhere, don't have the manuals yet, that part of the front bumper has to removed to mount the frt blower, is this correct?
Can't seem to find a good pic of all this online.
Thanks
 
   / JD 1026R #5  
Need a little more info, if you don't mind.
Is your 60" mmm the drive over Quik Trak?
I have read somewhere, don't have the manuals yet, that part of the front bumper has to removed to mount the frt blower, is this correct?
Can't seem to find a good pic of all this online.
Thanks

I have a 60" Drive Over, Auto Connect deck & a front blade for my 1026R. I will not be using a snow blower on it. The only difference between using the front blade & front blower is the addition of the front PTO & angle locking pin. After I installed the front hitch kit, all I have to do to install the front blade is remove the deck, install the bracket that is setting in front of the tractor & mount the hitch & blade.

DSCF2056.jpg
 
 
Top